Author Topic: replacement radio  (Read 997 times)

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
replacement radio
« on: April 30, 2017, 09:14:49 PM »
Has anyone installed a different radio(12V) in the HJ, using just the chrome mounting bracket/ faceplate.
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
Re: replacement radio
« Reply #1 on: May 05, 2017, 09:42:54 AM »
It looks like no one has replaced their radio using the stock mount !!!
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

Mike Richards

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • Email
Re: replacement radio
« Reply #2 on: May 16, 2017, 07:55:30 PM »
didn't do the swap as I ended getting a radio from Fid, but the hole for the radio face plate is smaller than most more modern radios/decks, I don't know why with careful trimming it couldn't be done, as long as the new unit fit under the dash.

Terry T

  • Hero Member
  • *****
  • Posts: 1217
  • EX--Editor Darrin Newsletter/Registry
    • View Profile
    • Email
Re: replacement radio
« Reply #3 on: May 16, 2017, 08:06:43 PM »
I had the original radio redone with modern electronics----250 watt, 5 channel am/fm with aux input that I use for an xm radio input.
System includes converter from 6v pos ground to 12v neg ground to supply the radio.
I used the original faceplate.
One cannot tell that it is not original.

It drives two speaker systems in the rear seat area.

I'm now jamming to rock and roll on my drives.