Author Topic: rubber boot in firewall for accelerator pedal rod  (Read 2060 times)

retroguy

  • Full Member
  • ***
  • Posts: 119
  • '54 Kaiser Manhattan 003764 K542
    • View Profile
    • Email
rubber boot in firewall for accelerator pedal rod
« on: February 21, 2023, 09:55:40 AM »
I need the rubber boot in the firewall that seals off the engine compartment from the passenger compartment hole for the accelerator pedal rod.  Anyone have one or know of a source?  Also I get a lot of engine noise inside the car: any info regarding installing better firewall insulation?

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
Re: rubber boot in firewall for accelerator pedal rod
« Reply #1 on: February 22, 2023, 02:24:21 PM »
Walck's 4 Wheel drive sells the throttle pedal boots:

https://walcks4wd.com/Accelerator-Pedal-Grommet-Rubber-1945-1971-All-Models-Except-V6-OHC-230_p_910.html

Regarding firewall insulation, check out Quite Ride Solutions at  https://www.quietride.com/

Hopefully, these sites will help.

1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Terry T

  • Hero Member
  • *****
  • Posts: 1222
  • EX--Editor Darrin Newsletter/Registry
    • View Profile
    • Email

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
Re: rubber boot in firewall for accelerator pedal rod
« Reply #3 on: February 22, 2023, 08:30:59 PM »
Even better yet!   I know there was a time when no one was doing them.  They are the same as one of the International Harvesters.  I think I searched on that and got one many  years ago.  Guess I'll check ebay if I ever need one again!
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Terry T

  • Hero Member
  • *****
  • Posts: 1222
  • EX--Editor Darrin Newsletter/Registry
    • View Profile
    • Email
Re: rubber boot in firewall for accelerator pedal rod
« Reply #4 on: February 23, 2023, 09:26:00 AM »
all of "our" part suppliers gotta get parts somewhere...
I have never found "marque" suppliers to be a bargain

retroguy

  • Full Member
  • ***
  • Posts: 119
  • '54 Kaiser Manhattan 003764 K542
    • View Profile
    • Email
Re: rubber boot in firewall for accelerator pedal rod
« Reply #5 on: February 25, 2023, 08:56:54 PM »
Thanks to all for the source info.  Will order a boot.