Author Topic: 4 cyl heatriser valve  (Read 1147 times)

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
4 cyl heatriser valve
« on: December 23, 2012, 09:19:37 AM »
The spring on the 51 heatriser valve is broken and I want to wire it open, so what position should the arm be, up or down? Thanks and Merry Christmas, Henry.
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

boatingbill

  • Sr. Member
  • ****
  • Posts: 495
    • View Profile
    • Email
Re: 4 cyl heatriser valve
« Reply #1 on: December 23, 2012, 01:14:50 PM »
The spring  expands as it gets warm and moves the heat riser valve to the open position. That is
the direction to move the heat riser all the way and wire it there.

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
Re: 4 cyl heatriser valve
« Reply #2 on: December 23, 2012, 05:11:08 PM »
To answer the question as to which way the arm should be, here's a picture right out of the shop manual:
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
Re: 4 cyl heatriser valve
« Reply #3 on: December 23, 2012, 09:09:24 PM »
Thanks, so I will wire it with the lever up. Henry.
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h