I've read a lot of posts here concerning vapor lock and electric pumps but I see nothing on the cool can method. Performance cars use them a lot. I'm looking for some advice on which method I should use. For anyone not familiar with the cool can, it's basically a coffee can with the fuel line coiled around the inner wall of the can where you dump ice (dry or regular) in the center, cooling the fuel before it gets to the carb.
As far as electric goes, Kaisers are negative ground, so how would you properly wire the pump? I have an AC Delco part # ep11 ( same as airtex # E8011) and a simple toggle switch. My thought on the electric would be to use it as a primer for starting and to avoid vapor lock in traffic ( parades) and such, whaddya think?