Author Topic: 1949 KAISER SPECIAL DOOR PUSH BUTTON  (Read 1215 times)

samos

  • Newbie
  • *
  • Posts: 18
    • View Profile
1949 KAISER SPECIAL DOOR PUSH BUTTON
« on: July 15, 2014, 12:35:59 PM »
DOES ANYBODY KNOW HOW TO REMOVE THE CHROME RING AROUND THE PUSH BUTTON THAT OPENS THE DOORS?
I GOT THE DOOR PANEL LOOSE ALL AROUND BUT CANT SEEM TO FIGURE OUT HOW TO TAKE THE RING OFF SO I CAN REMOVE THE PANEL.
MY SHOPE MANUAL ONLY GUIDENCE IS REMOVE THE BUTTON. I NEED TO DO IT CORRECT SO I WILL NOT DAMAGE ANYTHING.
                                                                                                      THANK YOU    KOSTAS PTINIS.
MEMBER #9736
49 SPECIAL
53 MANHATTAN
« Last Edit: July 15, 2014, 12:45:23 PM by samos »

JoeKeys2010

  • Hero Member
  • *****
  • Posts: 567
    • View Profile
    • Email
Re: 1949 KAISER SPECIAL DOOR PUSH BUTTON
« Reply #1 on: July 15, 2014, 06:10:43 PM »
I took mine off of my 49. Look at the pull handle. On the underside there are two screws. Unscrew them and the pull handle will come off. The door panel should slide over the button.
1949 Kaiser Deluxe
1964 Ford Custom (Galaxie)
1960 Metropolitan

samos

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: 1949 KAISER SPECIAL DOOR PUSH BUTTON
« Reply #2 on: July 16, 2014, 08:19:45 AM »
thanks...next time i have some time ill try it.....i did all you said the first time but it was not sliding out....ill pay closer attention at the button area next time.
 thanks again.