NOS Kaiser Frazer supension part numbers (UPDATED 10/20)

[rooney]

I have some NOS Kaiser Frazer upper and lower arm pivot kits....

Can anyone tell me what these part numbers fit: 205780, 208597, 212340, 205782



     I appreciate it>>>THANKS  STEVE M

[jerussel]

I don't know what other cars these fit, but the following fit a '51 Frazer Vagabond, at least.
205780 Front upper arm pivot - inner repair kit
205782 Front lower arm pivot - inner repair kit

[rooney]

Thank you for the info, maybe these kits fit other kaiser frazers also....ROONEY

[dpledger]

205782 -Lower inner repair kit for 51-53K at least, and as far as I know 54's as well.(no 54 parts book)
208597 - Right (high pitch) horn for 51-53K and likely 54
212340 -upper inner pivot kit for HJ
205780 is not called out for 51-55K so would assume it's older series

[Fid]

205780 is not listed in the 1947 - 48 Parts book

[custom]

my reference shows 205780 as the inner upper arm pivot kit for 47-49K and 47-51F

[rooney]

Thanks you all for the info, does anyone need any of these, if so make an offer....STEVE M.  smav@charter.net or 989-356-9201

[jerussel]

What do you wawnt for the 205782 Front lower arm pivot - inner repair kit?
I have one, but need two.
Thanks,
John
jerussel@msn.com

[rooney]

205782 -Lower inner repair kit for 51-53K at least, and as far as I know 54's as well.(no 54 parts book)
208597 - Right (high pitch) horn for 51-53K and likely 54
212340 -upper inner pivot kit for HJ
205780 is not called out for 51-55K so would assume it's older series

Can anyone tell me what the #208591 susp. part is for, #208597 wasn't correct that I posted before...

Also is this Distributor for a Kaiser?  Part number Auto-lite IGS 4211 7B1T  IGS 1170 under the housing....





THANKS  STEVE M

[Fid]

The Autolite IGS-4211 was used on 1947-48 Kaiser. The 1949-51s used an Autolite IGS-4214 which had a different angles for the centrifugal and vacuum advance but physically, they're the same.
Part number 208591 is "Front suspension upper arm inner-pivot" repair kit for a 1951 Kaiser and likely all following years ('52-'55) but I can't be sure on that.

[rooney]

The Autolite IGS-4211 was used on 1947-48 Kaiser. The 1949-51s used an Autolite IGS-4214 which had a different angles for the centrifugal and vacuum advance but physically, they're the same.
Part number 208591 is "Front suspension upper arm inner-pivot" repair kit for a 1951 Kaiser and likely all following years ('52-'55) but I can't be sure on that.

Thanks a Bunch for the info>>>Does anyone need any of these parts?  ROONEY

[FrazerWill]

ROONEY, I'm interested in "# 205780 as the inner upper arm pivot kit for 47-49K and 47-51F" for my 49 Frazer. I haven't got into it yet but I might need it. I'll email you...

[FrazerWill]

The numbers are different in my 49 parts book or I'm reading it wrong. My book says #202052, is the kit, but the "205780" number is there too in the "Numerical Index". I'm guessing it's the same part.

[FrazerWill]

205782 -Lower inner repair kit
205780 - pivot , upper arm, inner (only in kit)

These are in my 49 parts book.