Dash Lights, Turn Signals and Brake lights

[JoeKeys2010]

I've spent two days with a test light and volt meter trying to get it to blink. I'm pretty much convinced it's in the switch. I have a diagram and have traced wires as best I can. If I install an after market blinker switch it blinks correctly.

I have all the lights working now just not the blinkers. The only issue I have is the switch for the dash lights is bad so I tied them into the headlight switch.

[brian.b]

Hey jockeys if your having problems finding the puller for your rear axle maybe check around see if anyone works on a lot of jeeps that's )w I found one....

[JoeKeys2010]

A mechanic friend of mine said Dodge had similar hubs. He borrowed a puller for theDodge but that was several years back. He's going to check back and I the meantime I'm going to look to see what I can find.

[54manhattan13]

I purchased my puller from our local Car Quest parts store. It came as part of a large set of various pullers. Cost a few dollars over $100.00

[JoeKeys2010]

Thanks for the tip.

[JoeKeys2010]

I made a puller. Welded a nut to a piece of plate and got long bolts. Pulled it right off. Working over the wheel cylinder now. It's not in too bad of shape.