Window channel and weatherstripping Henry J

[Daveegt]

I am taking the vent windows out of my 52 Henry J. I am getting the items from Restoration Specities. I am using AS1198 for the channel, M8 belted weatherstrip for the window wipe. My problem is the fasteners. One posting indicate using clip #2348, this is not anywhere close to what's on it. #1335 is much closer, can you help me find the right one?
Thanks, Dave

[Gordie]

Lots of people use tiny metal screws which work well and are not visible. They are attached to the inner door and window frames.

[54manhattan13]

By taking the advise of my body shop man l used a permanent glue. It has held up well so far.(a bit over a year now) I purchased some small clamps, clothes pin type, and clamped the strips about 4 per 6 inches. Let it dry for 24 hours.

[oldpm]

Could you name the glue that you used?

[54manhattan13]

I used "Quick Grip" all purpose adhesive. Beacon Adhesives, Mount Vernon, NY

[54manhattan13]

A photo of the adhesive used

[oldpm]

Thanks much, will give it a try.
Barry

[Daveegt]

Thanks, I think an adhesive would be easier to use. After getting everything lined up, put. Glue on,  align and push new window pane in and secure with bungee cord.

[Henry's HenryJs]

On my 57 Chevy I used small screws. You have to sink them in as deep as you can or the top of the glass will chip, like mine did. I will probably do the same thing on the HJ and add a bit of glue for double protection.