Kaiser Frazer Owners Club Forum

General Category => Parts For Sale & Wanted => Topic started by: darrin502 on February 22, 2018, 06:35:00 PM

Title: Borg Warner part
Post by: darrin502 on February 22, 2018, 06:35:00 PM

I am looking for a T96-F6 Borg Warner input shaft cover.
Also a spring clip that holds the throw out bearing assembly to the clutch fork.
Thanks
Lee

Title: Re: Borg Warner part
Post by: Fid on February 22, 2018, 08:38:01 PM

This part?

Title: Re: Borg Warner part
Post by: Terry T on February 22, 2018, 09:05:44 PM

officially called front bearing retainer

Title: Re: Borg Warner part
Post by: darrin502 on February 22, 2018, 10:14:53 PM

No I have 2 of those it has to be the T96-6F the other puts the fork ball just slightly off center.

Title: Re: Borg Warner part
Post by: darrin502 on February 22, 2018, 10:16:30 PM

Terry you are correct.

Title: Re: Borg Warner part
Post by: darrin502 on March 19, 2018, 01:01:56 PM

Hi Fid
Do you have the input shaft bearing retainer with the T96-6F stamped on it ?
Thanks
Lee

Title: Re: Borg Warner part
Post by: MarkH on March 22, 2018, 03:23:48 PM

Is this it?

Title: Re: Borg Warner part
Post by: Fid on March 22, 2018, 05:22:15 PM

Quote

Hi Fid
Do you have the input shaft bearing retainer with the T96-6F stamped on it ?

I don't know. I gathered up a lot of parts from a deceased member some 15 years ago and I cataloged them all by part number.  Do you have a part number for it?  If so, I can look it up that way.

Title: Re: Borg Warner part
Post by: darrin502 on March 23, 2018, 06:39:37 PM

Mark that is the one i need will you sell it? I have the one for the HJ or willys I can give you if you need to replace that one.

Title: Re: Borg Warner part
Post by: darrin502 on March 23, 2018, 06:41:32 PM

Thanks Fid I do not have a part #.

Title: Re: Borg Warner part
Post by: MarkH on March 23, 2018, 09:53:11 PM

Quote from: darrin502 on March 23, 2018, 06:39:37 PM

Mark that is the one i need will you sell it? I have the one for the HJ or willys I can give you if you need to replace that one.

It's yours for the shipping. I've got a couple and recycled another on a lunched T-96 last summer. As far as I know, this is a standard Aero T-96 retainer

Title: Re: Borg Warner part
Post by: darrin502 on March 23, 2018, 11:47:25 PM

Thanks my address is
Lee Abrahams
1641 N Andros Pl
Tucson, AZ 85745
Let me know what the shipping is and I will send you a check.
Send me your address.

Thanks so much
Lee

Title: Re: Borg Warner part
Post by: MarkH on March 24, 2018, 09:45:55 AM

Probably get it boxed up and sent Monday. Did you find the spring clip?

Title: Re: Borg Warner part
Post by: darrin502 on March 24, 2018, 10:50:44 AM

No I haven’t do you have one?
I think I found the clutch fork if you have one I will buy it from you.
Also having trouble finding fuel pumps for 6 cyl F Head. Do you have any, cores would do I can rebuild them.
Thanks for all your help. If I can ever help you let me know.
Lee

Title: Re: Borg Warner part
Post by: darrin502 on March 24, 2018, 10:52:41 AM

My Email is
leeabrahams@cox.net
520-591-8221

Title: Re: Borg Warner part
Post by: MarkH on March 24, 2018, 08:50:20 PM

Email sent.