Kaiser Frazer Owners Club Forum

General Category => Kaiser Forum => Topic started by: Marse on July 22, 2014, 02:15:11 PM

Title: oil seal Hydramatic to drive shaft
Post by: Marse on July 22, 2014, 02:15:11 PM

Where can I get a replacement oil seal for the rear end of the hydramatic trans where the drive shaft enters the trans?  I have a 1951 4-door Kaiser 4-door deluxe sedan with a K50 GM HydraMatic Trans. The existing seal has a National P/N of 6010. This seal has a leather material/seal that rides on the drive shaft.  I don't know if this is correct for this car or not.  The drive shaft O.D. diameter is 1.5".  The O.D. of the 6010 seal (that fits into the trans) is approximately 2.156". 
I would appreciate any help you can give.

Marse - Tujunga, CA

Title: Re: oil seal Hydramatic to drive shaft
Post by: mbflemingkf on July 22, 2014, 07:21:52 PM

NAPA 1-2727

 8)

Title: Re: oil seal Hydramatic to drive shaft
Post by: Marse on July 22, 2014, 07:27:06 PM

Thank you.  I'll ask my local NAPA dealer to check this out for me.

Marse

My local NAPA dealers cannot locate the 1-2727 seal nor the National  6010 seal which is presently on the car.  Anyone else have other sources or solutions?
Thank you,

Marse