Kaiser Frazer Owners Club Forum

General Category => Parts For Sale & Wanted => Topic started by: alohagreen on September 20, 2016, 04:37:05 PM

Title: need carb part
Post by: alohagreen on September 20, 2016, 04:37:05 PM

If you have one....  a carb to part out ...please respond


need carb part 51 henry j 161ci 
the FLAT bracket with a bolt that clamps it on
the throttle shaft
....so that the
round rod can attach for opening movement...
i will attempt to show  a picture or 2 ....
thanks

in the LOWER pic it is the right side BENT piece


will show pictures as soon as i can

Title: Re: need carb part
Post by: alohagreen on September 21, 2016, 02:05:36 AM

yes... i think so.... the part or parts that slip/bolt on to the throttle shaft


bent twice out of flat metal...
and or  i could FAB/weld something out of 2 or 3 of those parts

answer is   YES...
 

Title: Re: need carb part
Post by: alohagreen on September 21, 2016, 02:34:45 PM

the bent piece near the bottom ON  the throttle shaft

Title: Re: need carb part
Post by: TotallyT on September 21, 2016, 06:21:33 PM

This one?

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 02:18:18 PM

somebody must have one

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:27:54 PM

yes sir...that is it
just like the one in the background

the 100 you spoke of ..that wouldn't be for a carb ...? would it...?

shown below is MY exact carb missing that  ARM

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:34:52 PM

wow its a nice one thats for sure

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:37:53 PM

i do not NEED the whole CARB
just that bracket / arm... that you have circled ...
and in your picture there's  one in the background

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:45:01 PM

ah SAD.... i ONLY NEED that SMALL arm/bracket... i do not NEED any other or more parts...

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:51:16 PM

i think its a 722 witha 648 base

Title: Re: need carb part
Post by: alohagreen on September 22, 2016, 11:59:27 PM

that's KQQL---- but i ONLY need a small PART.... not the WHOLE carb....
i'll check with them tom or row....
thanks JAKE

Title: Re: need carb part
Post by: Henry's HenryJs on September 23, 2016, 08:33:28 AM

Here is a picture of what one fellow did for carb linkage.

Title: Re: need carb part
Post by: alohagreen on September 23, 2016, 11:47:40 PM

I'm just goint to FAB my own ARM/BRACKET....

it will work just fine....

Title: Re: need carb part
Post by: alohagreen on September 25, 2016, 10:24:51 PM

un locked....
i would /could use the PROPER 833 carb ....
and then i could help  out the guy that IS LQQKin for the one i have....

(even i'm confused now ...lol)

Title: Re: need carb part
Post by: alohagreen on September 25, 2016, 11:36:15 PM

I can sell / trade my 820 for the 833....

Title: Re: need carb part
Post by: alohagreen on September 26, 2016, 03:32:21 PM

I'm locking this back up....
serves no purpose to chat about a carb part or carb
any longer...