Kaiser Frazer Owners Club Forum

General Category => Darrin Forum => Topic started by: kf751 on October 25, 2014, 07:12:20 PM

Title: Darrin carburetors
Post by: kf751 on October 25, 2014, 07:12:20 PM: From my latest research...

If you have a Darrin... the number on the base of the carburator should be yf 2071. It is a Carter for 1953. Other Hurricane F head sixes are yf 924 and Yf 937. All of the other are for 4 cylinder F heads etc.

Seems like Solex only make a carburator for the 4 cylinder F head. I could be wrong on that.

Please put you 2 cents in if my research is flawed.

Thanks.
Richard Johnson kfoc 751
Title: Re: Darrin carburetors
Post by: kf751 on October 26, 2014, 08:19:53 PM: Jake, do you have a picture of the base of the carburator showing the correct number? It seems all of the yf carburetors look the same and the majority are for 4 cylinder engines.

The trap we fall into is putting the wrong carburator on the Darrin with the incorrect rebuild kit.

Having the incorrect fuel valve will cause flooding and foul plugs.

Thanks, Richard
Title: Re: Darrin carburetors
Post by: joefrazer on October 26, 2014, 08:48:34 PM: The correct carb for the Darrin is a YF2094S. Here's a copy of the spec sheet from Carter Carburetor.
Title: Re: Darrin carburetors
Post by: kfoc751 on November 04, 2014, 09:07:40 PM: Great stuff guys. Thanks. Here is where I am heading. I have tired multiple carburetors. Most have a tendency to flood and foul plugs or starve for fuel. Some had the four kit and others had the six kit.

My wild guess is over the years the correct Darrin carburetors have been rebuilt and the three main components have been swapped out because they appear to look alike. So, many Darrin carburetors may be on 4 cylinder F heads having been rebuilt with the 4 cylinder rebuild kit and many hurricane six engines are using the 4 carburetors with the 6 rebuild kit. Many would say... The base number is un important. My car runs great the way it is...

Remembering that the neck has to be smooth so the air cleaner can fit on the car allowing the hood to close. Many yf carburetors have a lip on the top. OK for a Hurricane six on a jeep... Not so good for the Darrin. We need more information to figure this out.
Title: Re: Darrin carburetors
Post by: kfoc751 on November 04, 2014, 09:20:17 PM: Jake, we know that the Henry J is a 80 hp engine and not an 90hp F head. It also has a different air cleaner. No one knows that better than you. This adds to the confusion and creates another question.

Does it make any difference?

Yes. If the top half is different because of hood clearance issues. Also, is 10 hp important?

I don't know. You guys know more about this stuff than I do. Thanks
Title: Re: Darrin carburetors
Post by: Terry T on September 11, 2016, 07:34:24 AM: If the previous statement is true, explain the attached.
Note that the 216 engine is a "6-banger"

http://www.ebay.com/itm/CHEVROLET-CARTER-YF-1BBL-NO-964S-FOR-THE-216-C-I-ENGINE-/322257504432?hash=item4b080b48b0:g:ZCQAAOSwHoFXrGr2&vxp=mtr
Title: Re: Darrin carburetors
Post by: alohagreen on September 11, 2016, 08:27:25 AM: i have a 648 base
Title: Re: Darrin carburetors
Post by: Barnum on September 11, 2016, 05:21:02 PM: The base for the 216 carb is different in that the throttle plate is actuated from the opposite direction.