« previous next »
Pages: [1]

Author Topic: rear axle bearing retainer  (Read 747 times)

ghausgen

  • Newbie
  • *
  • Posts: 11
  • Jeepboyone
    • View Profile
    • Email
rear axle bearing retainer
« on: February 07, 2022, 11:18:30 AM »
What is the proper location of the  rear axle bearing retainer.  The HJ shop manual and 51 Kaiser manual shows it placed after the brake support plate. If it  (bearing retainer) goes on after the shims...what would be proper placement of the gasket?
Logged
Darrin 415

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: rear axle bearing retainer
« Reply #1 on: February 07, 2022, 01:29:13 PM »
Sometimes the diagrams in the Parts Books can be good.  Here's the one from the '51 Kaiser Parts Manual.  See if this helps.
Logged
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

ghausgen

  • Newbie
  • *
  • Posts: 11
  • Jeepboyone
    • View Profile
    • Email
Re: rear axle bearing retainer
« Reply #2 on: February 07, 2022, 05:14:32 PM »
None of the diagrams like that show where the brake support plate comes into play.  When i took mine apart the retainer was next to the shims then the brake support plate.  In the  manuals the written verbage tells that it goes in after the brake support plate.  I'm thinking the manuals are correct?
Logged
Darrin 415
Pages: [1]
« previous next »