Author Topic: Removing Ignition Switch  (Read 374 times)

Dixon

  • Newbie
  • *
  • Posts: 12
    • View Profile
    • Email
Removing Ignition Switch
« on: January 18, 2022, 09:23:25 PM »
I need to re-chrome the dash on my 51 kaiser and need to remove the ignition switch. I stick a small wire into the hole on the bottom of the tumbler with the key inserted and feel a spring depress but then nothing comes apart.  The manual says nothing about this.  What am I doing wrong?

kaiserkid

  • Full Member
  • ***
  • Posts: 127
    • View Profile
    • Email
Re: Removing Ignition Switch
« Reply #1 on: January 19, 2022, 11:33:18 AM »
Once you depress the spring, turn the cylinder counter clockwise and pull it out. You should also disconnect the battery.

kaiserfrazerlibrary

  • Hero Member
  • *****
  • Posts: 3005
  • KFOCI Historian
    • AOL Instant Messenger - none
    • Yahoo Instant Messenger - none
    • View Profile
    • Email
Re: Removing Ignition Switch
« Reply #2 on: January 20, 2022, 01:20:48 AM »
disconnecting the battery first is highly recommended.