Author Topic: removing rear seat?  (Read 1072 times)

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
removing rear seat?
« on: November 14, 2011, 10:03:23 PM »
How do I remove the rear upper and lower seats on a 53 Corsair?
« Last Edit: November 14, 2011, 10:05:42 PM by our53henryj »
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

Fid

  • Hero Member
  • *****
  • Posts: 3851
    • View Profile
    • Email
Re: removing rear seat?
« Reply #1 on: November 14, 2011, 10:11:09 PM »
The bench is removed by pushing back on the bottom front edge of it to unhook it from the clips, then lift it up and out.  When you  have the bench out there are two bolts along the bottom of the seat back that need to be removed and then it lifts up off the hooks that hold it at the top. There may be some metal tabs that need to be bent open when removing the back as well. Unfortunately when I did it last I did not take photos as I did with just about everything since.
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
Re: removing rear seat?
« Reply #2 on: November 15, 2011, 08:09:02 AM »
Thanks Fid, I suspected that was the way, as most NA cars were done but I did not want to damage anything until I was sure, Henry.
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h