rear height

[Henry's HenryJs]

I am mocking up the new diff and need the at rest distance from the top of the axle to the bottom of the frame. If this is available on a site would you point it out to me and I will bookmark the site, thanks, Henry.

[Henry's HenryJs]

bump

[Henry's HenryJs]

How about from the top of the diff to underside of the rubber stop??? Anyone?

[Henry's HenryJs]

another bump!!!!!!!!!!!!!

[Henry's HenryJs]

No one has a tape measure?

[BigDave LM6174]

Love to help but I think my springs are sagging

[Fid]

My cars are stored for the winter, 21 miles away in a shed surrounded by 10" of snow and it's -20 degrees here. Do  you want to come up and measure it? I'll lend you one of my tape measures.

[Henry's HenryJs]

Thanks, at least I got some responce to my Question. No Fid I do not want you to go out in this weather. Is there not a measurement in the factory manual?
   Henry.

[mbflemingkf]

hahahaha...too much!

[alohagreen]

I have 8 inches bottom of frame to top of axle...

[Fid]

Alohagreen, 8" - that's how much snow we got last night. Unfortunately it will be a while before my cars see the road again.

[Henry's HenryJs]

Thanks aloha. Henry

[alohagreen]

Alohagreen, 8" - that's how much snow we got last night. Unfortunately it will be a while before my cars see the road again.

well FID if it was not  for YOU mine ed STILL be sitting....
it sat for over 20 years now its  in the front row of drivers (year round climate controlled shop)

Fid knows his stuff

 

[Vagabond Russ]

I have 8 inches bottom of frame to top of axle...

Eight inches is what I have on the Vagabond.

[Henry's HenryJs]

We lowered the empty body onto the frame yesterday and I measured 6" from the top of the axle tube to the bottom of the frame next to the rubber bump stop. Henry