Author Topic: WONT START AFTER CLIMBING A HILL  (Read 4069 times)

retired wrench

  • Full Member
  • ***
  • Posts: 163
    • View Profile
Re: WONT START AFTER CLIMBING A HILL
« Reply #15 on: June 03, 2014, 06:49:46 AM »

 There is no lubrication required on a starter. Might be worth your while to have some tests done at a good auto electrical shop. A batt that is too small (lower amp rating) will act exactly like this,but so will a dragging starter. Have you checked the cables?

dusty

  • Sr. Member
  • ****
  • Posts: 303
    • MSN Messenger - mr_blueberry30@hotmail.com
    • View Profile
    • Email
Re: WONT START AFTER CLIMBING A HILL
« Reply #16 on: June 13, 2014, 12:53:20 PM »
get this!!! there was an old notification back in 1949 that GOING UP A STEEP HILL, THE CARB. BOWL FLOAT WILL SHUT OFF THE FUEL THE CARB. WILL REFILL WHEN RETURNED TO A LESSER INCLINE.  Happened to me going thuu an old hilly apple orchard solution (BACK UP THE HILL, IT WORKED!!

Kenn Evans II

  • Full Member
  • ***
  • Posts: 169
    • MSN Messenger - winslowcemeteries@gmail.com
    • View Profile
    • Email
Re: WONT START AFTER CLIMBING A HILL
« Reply #17 on: June 16, 2014, 01:05:35 AM »
Check you ground cables and maybe take a ground right to the case of the starter where it bolts to the back of the block. Another to help cool the fuel, make yourself a cool can, get some 3/8" stainless steel tubing, and a tubing bender, make a coil with the tubing and bring the ends together, connect your fuel lines in and out to the carb and submerge the coil into a #10 can with ice water.
Family of 1952 Kaiser Manhattan 1952 Kaiser Deluxe 1949 Kaiser Traveler 1961 Falcon Ranchero 1963 Galaxie 500 XL Conv. 1964 Cadillac Sovereign Landaulet combination ambulance hearse , 1970 Ford Truck F100 1972 Chevelle SS Conv.  1979 Chevrolet C100 KF Member # 10252