Author Topic: license bulb  (Read 691 times)

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
license bulb
« on: November 09, 2016, 08:14:20 AM »
I took the light off last night as it was not working. It turned out that the ground just had to be cleaned. Looks like the bulb should come out from inside as the socket has the tangs that clip into the housing from inside. More learned on these cars.
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

Corsairdeluxe

  • Hero Member
  • *****
  • Posts: 811
    • View Profile
    • Email
Re: license bulb
« Reply #1 on: November 09, 2016, 12:09:37 PM »
I run a ground wire to both tail light sockets as well as the license light. You will be amazed at the difference! If you have an opening trunk, one of the bolts securing the latch striker plate is a good ground source.
Jim Brown aka Corsairdeluxe
#3559
10 Henrys and 1 ALLSTATE
behind me. J less at the moment and having irrational thoughts.