REMOTE FILL FOR MASTER CYLINDER

[jneely]

I suspect this is the one Mark is talking about. Not exactly a bargain but looks more authentic than most

https://highway101ind.com/shop?olsPage=products%2Fez-fill-reservoir-jeep-1941-1964-all

[Corsairdeluxe]

I have this which I think is left over from a KF kit.

[Corsairdeluxe]

I do not think that vertical hose barb will fit under the HJ floor boards. I had to use a 90 degree one.

[rrdcorvair]

I bought a couple of kits and letting them know it was for a Kaiser car they pointed out the clearance problem and supplied the cap with a 90 degree fitting.

[MarkH]

I suspect this is the one Mark is talking about. Not exactly a bargain but looks more authentic than most

https://highway101ind.com/shop?olsPage=products%2Fez-fill-reservoir-jeep-1941-1964-all

Yes, that's the one. Very nice and definitely looks era correct. Dorman makes a round "bellows" type cap gasket that might fit it if you want a sealed chamber instead of a direct vent to atmosphere. (Dorman #42072) I did that on mine, bellows not nearly big enough to compensate for much fluid loss so checking often is required.

[Terry T]

I do not think that vertical hose barb will fit under the HJ floor boards. I had to use a 90 degree one.

just installed w/straight nipple--fits, barely, but it fits