Author Topic: 52 aero wiring  (Read 2938 times)

ss442

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • Email
52 aero wiring
« on: March 20, 2011, 11:54:35 AM »
im in the process of restoring my 52 areo eagle however a previous owner has cut the wires for all the lights and the generator i have the car running and need to figure out what wire goes where  any help would be appreciated also would like info on rebuilding fuel pump
52 aero eagle
68 chevelle
71 vw super

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
Re: 52 aero wiring
« Reply #1 on: March 20, 2011, 10:10:19 PM »
Then and Now Automotive sells kits for, and rebuilds, fuel pumps. Contact them at
http://dragsite.tripod.com/then_and_now_automotive___se.htm

Regarding the wiring - if the wires are still connected to the generator, there will be one that is ground which is connected directly to the case on the generator. That one will go and usually be connected to one of the mounting bolts on the regulator. There are two other terminals on the generator. One will have a thicker wire and one will be much thinner. The thin wire goes to the feild terminal on the regulator (sometimes abbr FLD) and the thicker one goes to the Armature or GEN terminal on the regulator (often abbrev ARM or GEN).

Let me know if this helps.
« Last Edit: March 21, 2011, 08:35:02 AM by Fid »
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

ss442

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • Email
Re: 52 aero wiring
« Reply #2 on: March 25, 2011, 06:57:43 PM »
thanks that covers the generator now if i can just figure out the lights horn and turn signals
52 aero eagle
68 chevelle
71 vw super

Aeroman

  • Hero Member
  • *****
  • Posts: 776
    • View Profile
    • Willys Aero Survival Count
    • Email
Re: 52 aero wiring
« Reply #3 on: March 28, 2011, 11:50:34 AM »
Club member Bob McBride does wiring harnesses, see his ad in the monthly newsbulletin. He has reconstructed one for the 226 engine Aeros but has never done an earlier one. Give him a call, I've bben told his work is very good.
Rick Kamen
KFOCI LM4314 since 1979
Willys Aero Survival Count
aeroman@aol.com
http://clubs.hemmings.com/willysaero
1954 Willys Aero Eagle "Old Toby"
1964 Ford Econoline panel van
Once owned 11 other Willys Aeros and a Willys wagon, 2 Kaisers, 1 Henry J, plus Studebakers, Hudsons, a Nash and others.

ben-tex

  • Sr. Member
  • ****
  • Posts: 266
    • View Profile
    • KF NUT
Re: 52 aero wiring
« Reply #4 on: March 30, 2011, 02:18:58 PM »
When I scanned the files to make the wiring diagram cd for the Kaiser cars I also scanned the Willys diagrams in the various books I had on hand. I found these scans today on one of my old hard drives. Here are the files available:
46-52 overdrrive
52 685 chassis
53 passenger car
53 jeepster, station wagon
54 F head engine
54 K engine
52-54 turn signals 675, 685
46-50 four wheel drive station wagon
46-52 station wagon, jeepster 4
46-52 station wagon, jeepster 6
These titles are from the actual diagrams. I am not too familiar with these models. All diagrams in pdf format which means they can be enlarged, rotated etc for use. I will burn these on a cd and mail first class for $6. No fancy labels just the cd. Use the link to my web site to find my address for order or email me with questions.
« Last Edit: March 30, 2011, 02:23:31 PM by ben-tex »
Life Member
Quarterly Editor 1985-2001
Developed first official club website
1951 Kaiser Deluxe
1951 Frazer Vagabond
2008 Pacemaker :)