Author Topic: Parts needed - Darrin  (Read 1886 times)

kdar353

  • Jr. Member
  • **
  • Posts: 67
    • View Profile
Parts needed - Darrin
« on: February 10, 2012, 12:03:46 PM »
I am in final stages of putting another Darrin back on the road and need:
1. Knurled cap for a wiper stalk for installing Wiper arm on.
2. Need passenger side wiper arm. (usable arm)
Any help would be much appreciated or some source where I migh find these items.
Thanks,
Bill #353

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

darrin145

  • Full Member
  • ***
  • Posts: 244
    • View Profile
    • Email
Re: Parts needed - Darrin
« Reply #2 on: February 10, 2012, 01:36:33 PM »
Those ebay parts don't look like what is on my Darrin, but then again, I'm not positive that what I have is "original", I just cleaned and detailed the wiper transmission, etc., the "stands" don't look proper. As far as wiper arms go, I got new ones from National Parts Depot (www.npdlink.com) for $39.50 for the pair, they fit a 1957 T-bird. I also put a new pair on my '57 Bird during it's restoration, they are nice. There is a company that makes those knurled pieces but I can't seem to find the info right now.

Gary.

pnw_oldmags

  • Administrator
  • Hero Member
  • *****
  • Posts: 1284
  • Personal Text
    • View Profile
    • CircleKF Website
    • Email
Re: Parts needed - Darrin
« Reply #3 on: February 10, 2012, 04:02:49 PM »
What was National Parts Depot Part Number??
Jim Betts  LM6945
PNW Traveler Editor
CircleKF Webmaster
https://circlekf.com

darrin145

  • Full Member
  • ***
  • Posts: 244
    • View Profile
    • Email
Re: Parts needed - Darrin
« Reply #4 on: February 10, 2012, 05:08:57 PM »
The NPD part # is T-17526-1, $39.50 for the pair.

Gary.

mbflemingkf

  • Hero Member
  • *****
  • Posts: 812
    • View Profile
    • Email
Re: Parts needed - Darrin
« Reply #5 on: February 10, 2012, 07:26:33 PM »
Gary, thanks for posting the parts number.  I went to the web site but unfortunately, they don't show a photo of the part.  I need a set for my car (54 Manhattan) as well.  Are these bent left and right at the ends?  Can you let us know the overall length?

Thanks, Mike
KFOCI #4818, Since 1982

Rear view mirror:
1954 Kaiser Manhattan, 4 Door (Now in FL)
1955 Kaiser Manhattan, 2 Door (Now in TX)
1953 Kaiser Manhattan, 4 Door (Now in Australia)
Thousands of parts & literature (All over the world)

darrin145

  • Full Member
  • ***
  • Posts: 244
    • View Profile
    • Email
Re: Parts needed - Darrin
« Reply #6 on: February 13, 2012, 08:28:15 AM »
Mike - The part # given is for a pair and I believe they are bent at the ends, although I have a pair with adjustable ends also, so they will work left or right. I dug up the paperwork and the pair I have here are #T-17527-3, LH, and T-17526-3, RH. They are "concours correct", bayonet end arms. These are $29.95 each, (60 bucks a pair) a bit pricey but really nice. The overall length of the arm is 12".

Gary.