Author Topic: frame swap  (Read 2925 times)

48 Kaiser

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • Email
frame swap
« on: May 01, 2014, 05:19:17 PM »
what modern vehicles frame will a 48 special fit on?

DRAGON WHISPERER

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • Email
Re: frame swap
« Reply #1 on: July 02, 2014, 11:35:15 PM »
Ive heard that the 1975 full size chevys will be real close, I Am considering this myself, for the Dragon

51Deluxe

  • Sr. Member
  • ****
  • Posts: 296
    • View Profile
    • Email
Re: frame swap
« Reply #2 on: July 03, 2014, 12:19:14 PM »
If either of you end up doing this, be sure to post lots of photos of the process

Gordie

  • Hero Member
  • *****
  • Posts: 2495
    • MSN Messenger - gordies1@verizon.net
    • AOL Instant Messenger - Gordie
    • View Profile
    • Email
Re: frame swap
« Reply #3 on: July 03, 2014, 03:03:08 PM »
Chevy Caprice works for the 1951 and newer Kaisers.  Look for something with the same wheelbase as the early K-F cars.  I'm wondering if any late model Honda Accords or Nissan platform would work.  I have a 2010 Honda Accord and I sure wish I could put something like that under my '51 Kaiser conv. body  The frame on my car is all beefed up and I will probably end up using a later engine and transmission and front end and keep the Kaiser frame but you can't beat the power, handling and good gas mileage of the later luxury cars.
Member #3151 Since June 1974
Vice President K.F.O.C.I. 2013-2017  President 2018-2019
'47 Graham Paige Frazer                                   
'51 Kaiser Deluxe club coupe       
'51 Kaiser customized convertible 
'52 Allstate serial#39
'53 Aero Eagle
'54 Aero Eagle Custom

Fid

  • Hero Member
  • *****
  • Posts: 3855
    • View Profile
    • Email
Re: frame swap
« Reply #4 on: July 03, 2014, 05:22:00 PM »
Quote
Ive heard that the 1975 full size chevys will be real close, I Am considering this myself, for the Dragon

Just a note, if it fits a Dragon, it will not fit a '48 Special - two different bodies, two different wheel-bases.
The '48 K has a 123.5" wheel-base and the '51 and later cars (four doors) have a 118.5" wheel-base
« Last Edit: July 03, 2014, 05:32:57 PM by Fid »
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

51Deluxe

  • Sr. Member
  • ****
  • Posts: 296
    • View Profile
    • Email
Re: frame swap
« Reply #5 on: July 03, 2014, 06:12:26 PM »
 "I'm wondering if any late model Honda Accords or Nissan platform would work.  I have a 2010 Honda Accord "

Aren't Accords and most Nissans unit body cars?

vt2000driver

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • Email
Re: frame swap
« Reply #6 on: July 26, 2014, 06:12:52 PM »
so are 1980 camaro's if you use the sub frame it works.
1953 traveler (long gone)
1949 Bermuda tan (still in California not mine)
1953 Manhattan (parts car long gone)
1947 special (modified) Linda's
1953 Carolina my first Hydra-Matic not on road yet
1951 $520.00 delux with whiskey under front seat!

boatingbill

  • Sr. Member
  • ****
  • Posts: 495
    • View Profile
    • Email
Re: frame swap
« Reply #7 on: July 26, 2014, 11:35:50 PM »
There is a easier swap. Go to Kaiserbill.com and look under "restorations" and then "Nova
front suspension". This is a picture by picture guide on cutting the 51-55 Kaiser frame at the firewall and welding the front sub frame from a NOVA (chev), Omega (olds) Venture (pontiac)
or Apollo (buick). Then you can drop in a GM small block V8 and have power steering with disk brakes etc. He used a '68 but these GM bodies were for used years. I am sure you could research
other makes with the same track width as the 46-50 cars and do the same. It doesn't look
that difficult. Anyone have the front track width of the 51-55 bodies and the 46-50 bodies?

lessthan8

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: frame swap
« Reply #8 on: July 27, 2014, 05:35:41 PM »
check out early chrysler autos