« previous next »
Pages: [1]

Author Topic: need cylinder head and door handle  (Read 2523 times)

Lisa P

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
    • Email
need cylinder head and door handle
« on: September 24, 2009, 01:03:33 PM »
Hello everyone, I am looking for a cylinder head for a '48 Kaiser with the 226.  I also need an exterior driver's side front door handle.  If anyone has any of these items for sale, please let me know.  Thanks!
Logged

Gordie

  • Hero Member
  • *****
  • Posts: 2495
    • MSN Messenger - gordies1@verizon.net
    • AOL Instant Messenger - Gordie
    • View Profile
    • Email
Re: need cylinder head and door handle
« Reply #1 on: September 24, 2009, 07:24:17 PM »
Hello, Rudy Phillips should have both of those parts in his inventory.  You can call him at 1 760 789 3608.  Ask him to send one of his catalogs also.  It is loaded with K-F items.
Logged
Member #3151 Since June 1974
Vice President K.F.O.C.I. 2013-2017  President 2018-2019
'47 Graham Paige Frazer                                   
'51 Kaiser Deluxe club coupe       
'51 Kaiser customized convertible 
'52 Allstate serial#39
'53 Aero Eagle
'54 Aero Eagle Custom

FrazerWill

  • Full Member
  • ***
  • Posts: 153
    • View Profile
Re: need cylinder head and door handle
« Reply #2 on: September 24, 2009, 09:52:14 PM »
the guy with the 49 kaiser dash for sale I think has one too.
Logged

rooney

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • Email
Re: need cylinder head and door handle
« Reply #3 on: September 25, 2009, 08:39:17 AM »
Hi Lisa, I have 2 heads for I believe a 49 kaiser, 1 is a supersonic head, I'm not sure if the 49 is the same, do you have numbers on yours to compare...Let me know...Steve   smav@charter.net
Logged

Lisa P

  • Jr. Member
  • **
  • Posts: 87
    • View Profile
    • Email
Re: need cylinder head and door handle
« Reply #4 on: October 02, 2009, 09:11:50 AM »
Thanks guys, I have a cylinder head on the way but am still looking for the door handle. 
Logged

Fid

  • Hero Member
  • *****
  • Posts: 3858
    • View Profile
    • Email
Re: need cylinder head and door handle
« Reply #5 on: October 02, 2009, 10:13:05 AM »
The cylinder heads are not all the same. There was a higher compression head that was used on Frazer Manhattans and possibly some Kaiser Customs or Deluxes. The 1948 Kaiser would have the lower compression head. I don't know if it will be a problem if you replace the lower compression head with the higher compression - probably not. You'll likely appreciate the increase in power.
« Last Edit: October 12, 2009, 10:12:20 PM by Fid »
Logged
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios
Pages: [1]
« previous next »