Kaiser Frazer Owners Club Forum

General Category => Parts For Sale & Wanted => Topic started by: joefrazer on October 31, 2018, 09:41:46 AM

Title: Parts for sale
Post by: joefrazer on October 31, 2018, 09:41:46 AM
I started a thread on FB a few weeks ago so I thought I'd do the same here. I have decided to thin the pile of KF parts that I've amassed over the years so if there's something you're looking for, I might have it. IM me or post here with wants.

I cannot ship large items - bumpers, fenders, large grille parts for example - but you are welcome to arrange pickup if I have what you need. And, I cannot ship overseas.
Title: Re: Parts for sale
Post by: Bob L. on November 01, 2018, 09:20:34 AM
So, where is this stash/cache of treasure located?  X marks the spot!  :)  Bob L.
Title: Re: Parts for sale
Post by: joefrazer on December 13, 2018, 12:37:11 PM
I might have one. I’ll check when I’m next at the shop.
Title: Re: Parts for sale
Post by: Johnny canuck on December 31, 2018, 05:57:16 PM
Do you have the distributor bushings for a 1948 Fazer?
Title: Re: Parts for sale
Post by: joefrazer on December 31, 2018, 11:08:15 PM
No but I probably have a good distributor if interested.
Title: Re: Parts for sale
Post by: Kory Fox on January 01, 2019, 09:56:14 AM
I'm still looking for more bumber bolts for my '48K. Also could use a good radiator. Mine needs recored.
Title: Re: Parts for sale
Post by: joefrazer on January 01, 2019, 12:20:11 PM
I might have a good used radiator. Two different widths were used. Measure yours and let me know.
Title: Re: Parts for sale
Post by: Nils on January 07, 2019, 09:31:50 AM
Hello, do you have the big wing shaped grille parts for a '51 Kaiser de Luxe? I could have them picked up by a courier and arrange for shipping myself. I would need assistance with packing, though.
Title: Re: Parts for sale
Post by: Mike Richards on January 08, 2019, 10:42:40 AM
How about a Delco distributor for a 4 cylinder Henry J?
Title: Re: Parts for sale
Post by: joefrazer on January 08, 2019, 12:51:45 PM
Mike - sorry but I can’t help with the distributor.

Nils - I’ll check to see if I have any grille parts. I know I have the upper ends (curved parts) and the retainers for them. I will advise on the other items.
Title: Re: Parts for sale
Post by: Evan Crowell on January 24, 2019, 03:05:38 PM
You wouldn't happen to have an overdrive transmission?
Title: Re: Parts for sale
Post by: Terry T on January 24, 2019, 06:12:13 PM
where are you?
Title: Re: Parts for sale
Post by: Kory Fox on February 09, 2019, 11:04:35 AM
Finally remembered to measure my radiator. It's about 18" wide. Ig you have a good one I'd be interested.
Title: Re: Parts for sale
Post by: Jerry Wilbeck on February 13, 2019, 12:51:43 PM
Anybody have any hood springs for a 47 or 48 or 49 kaiser or frazer they would sell?
Title: Re: Parts for sale
Post by: larryk on February 19, 2019, 11:34:36 PM
Drivers door glass and door latch mechanism for 53 Henry J ?
Title: Re: Parts for sale
Post by: joefrazer on February 20, 2019, 05:23:01 AM
Henry J door glass is flat so any auto glass shop should be able to cut new. I might have a latch, I'll check and advise.
Title: Re: Parts for sale
Post by: darrin502 on February 20, 2019, 03:37:11 PM
Any extra Darrin parts?
Lee
Title: Re: Parts for sale
Post by: joefrazer on February 20, 2019, 08:31:07 PM
Sorry Lee, no extra Darrin goodies.
Title: Re: Parts for sale
Post by: Nils on February 22, 2019, 10:32:44 AM
Hi, do you happen to have a wiper switch for a vacuum motor for a Kaiser de Luxe '51?
Thanks!
Title: Re: Parts for sale
Post by: flamingchariots on February 22, 2019, 07:58:21 PM
I'm still looking for a '51 Kaiser driver's door vent window assembly [sedan] .  It is shaped a lot like a "4".  A decent frame is the main thing, because right now there is just an opening there.  I'd like to get it sealed up and functional. 

I am within driving distance of NE Ohio.
Title: Re: Parts for sale
Post by: OLDNMKFR on February 22, 2019, 10:00:10 PM
I need the following pieces off any 1951 to 1953 Kaiser. The controls off the lower heater control panel. I do not need the panel or the handbrake part but would need the chrome bezel, nuts, and cables of the switches and controls. (hopefully not too rusty and decent chrome). I understand that the cables can be loosened and cleaned with penetrating oil. I live in New Mexico. 88312   Thanks, Bernard
Title: Re: Parts for sale
Post by: joefrazer on February 23, 2019, 10:21:52 PM
To answer a few requests:

- I did not see a vacuum wiper switch in my box of switches but will look with the wiper motors. I will advise.

- Still looking for a Henry J door latch. I'm pretty sure I have one.

- For the window vent assembly, I have used but usable. It isn't pretty but will do the job. It'll be cheap if you can pick it up.

- Will check on the lower dash bits. I will advise.
Title: Re: Parts for sale
Post by: larryk on February 24, 2019, 09:10:01 PM
joefrazer, thank you for looking for the door latch.
While you are looking, do you happen to have the "C" and "V" knobs for the dashboard?
And, I know that it is a long shot, but I also need the 3-finned translucent plastic insert for the hood ornament.
Thanks again!
Title: Re: Parts for sale
Post by: joefrazer on February 24, 2019, 10:12:38 PM
Followups:

- larryk, I do not have any knobs or the hood ornament tip. Knobs are available from Rudy Phillips, one of our club vendors. He may have the ornament tip as well. He can be reached at 760.789.36o8, usually around noon pacific time, US. I'm still looking thru the two large boxes of latches I have for a HJ unit. I'm pretty sure I have one.

- Nils, by luck I found a vacuum switch and cable for the 51 Kaiser. It's $35 plus shipping. A picture is attached. I don't think I have a good knob but will look for one.

- flamingchariots, I do have a driver side vent window assembly for the 51K. As I mentioned in an earlier post, it isn't pretty but the glass is not cracked and the vent window opens and closes in the frame as it should. Shipping would be ridiculous so if you can pick it up, or arrange for someone to do it for you, I'll make you one heck of a deal.

- OLDNMKFR, I have good used TEMP and DEFROST cables that work - they'll need a cleanup - and will look for the VENT cables. I should have the heater switch as well, I will advise once I get to where the box is stored. A photo of the two cables I have is attached.
Title: Re: Parts for sale
Post by: mbflemingkf on February 24, 2019, 10:20:49 PM
Club member Rodney Leas had the hood ornament tip for sale at the National.

 8)
Title: Re: Parts for sale
Post by: flamingchariots on February 25, 2019, 02:23:44 PM
joefrazer, pm sent.
Title: Re: Parts for sale
Post by: larryk on February 25, 2019, 11:28:08 PM
Club member Rodney Leas had the hood ornament tip for sale at the National.

 8)

Do you know how I can get in contact with him? Rudy's does not have the part.
Title: Re: Parts for sale
Post by: Dragon on February 26, 2019, 09:57:20 AM
Club member Rodney Leas had the hood ornament tip for sale at the National.

 8)

Do you know how I can get in contact with him? Rudy's does not have the part.
It was SOLD at National last year.
Title: Re: Parts for sale
Post by: larryk on February 26, 2019, 11:27:04 AM
Club member Rodney Leas had the hood ornament tip for sale at the National.

 8)

Do you know how I can get in contact with him? Rudy's does not have the part.
It was SOLD at National last year.

Yeah, I will probably go with this style for now............................
https://www.ebay.com/itm/NEW-Hood-Ornament-Nose-Spear-Tip-1951-Henry-J-Kaiser-Frazer-part-212044/392244645103?fits=Make%3AHenry+J&hash=item5b539a4cef:g:PB8AAOSwPcBbODRZ:rk:6:pf:0 (https://www.ebay.com/itm/NEW-Hood-Ornament-Nose-Spear-Tip-1951-Henry-J-Kaiser-Frazer-part-212044/392244645103?fits=Make%3AHenry+J&hash=item5b539a4cef:g:PB8AAOSwPcBbODRZ:rk:6:pf:0)
Title: Re: Parts for sale
Post by: Fid on February 26, 2019, 10:40:08 PM
I believe Adam is reproducing the '53 hood ornament tips.  This one was on ebay recently.  Try clicking on the seller's ID and when the next screen appears choose "Contact" and ask if there are others:

https://www.ebay.com/itm/1953-54-Henry-J-3-finned-hood-ornament-spear/264186019292?hash=item3d82b6bddc:g:Fz4AAOSwwrlcXQ~7&vxp=mtr
Title: Re: Parts for sale
Post by: joefrazer on February 27, 2019, 05:14:50 PM
PM sent on the door latch.
Title: Re: Parts for sale
Post by: larryk on February 27, 2019, 11:13:53 PM
PM sent on the door latch.

PM returned, Thanks!
Title: Re: Parts for sale
Post by: Fmalvine on March 12, 2019, 03:37:53 PM
need trim quarter panels for 49 Frazer Manhattan[ extend along from front fender to back fender.] also need Manhatten insignia both fenders thanks   Frank ALvine
Title: Re: Parts for sale
Post by: joefrazer on March 12, 2019, 04:31:04 PM
Frank - sorry I cannot be of help.
Title: Re: Parts for sale
Post by: Fid on March 12, 2019, 05:09:28 PM
Frank, this is a Frazer Manhattan script:

https://www.ebay.com/itm/Kaiser-Manhattan-Vintage-Metal-Emblem-Badge-Trim/372365171370?hash=item56b2b19aaa:g:75UAAOSwSU1bRZ9c

The seller listed it as "Kaiser" but that's wrong (often happens as many sellers are not old car experts).  This 'Manhattan' script was only used on 1947-50 Frazers.
Title: Re: Parts for sale
Post by: jake on March 12, 2019, 08:23:37 PM
I may have two of them. I just do not know where they are at..
Title: Re: Parts for sale
Post by: Fid on April 02, 2019, 10:08:40 AM
And here's a couple more:

https://www.ebay.com/itm/1948-Kaiser-Frazer-Manhattan-Front-Fender-Emblems-Script-Rat-Rod/254186105142?hash=item3b2eac2936:g:A3sAAOSwCuBclO4p
Title: Re: Parts for sale
Post by: aero-eagle on April 19, 2019, 02:11:09 AM
hello joe, am needing park lamp bezels with or w/out lenses for a 51 Kaiser, do you have any, thanks, doug
Title: Re: Parts for sale
Post by: joefrazer on April 19, 2019, 06:48:13 AM
Hi Doug,

I can't help. I have some NOS but they were poorly stored and are pitted.
Title: Re: Parts for sale
Post by: rrdcorvair on April 19, 2019, 10:24:44 PM
Hi,
   I have several 1951 Kaiser nos front bezels (#207371) (Willys 718140) and several lenses (KF#207369, Willys 718138). $25.00 each plus shipping. Bob Dayton, Vermont   rrdcorvair@yahoo.com