Kaiser Frazer Owners Club Forum
General Category => Kaiser Forum => Topic started by: Wnero on March 22, 2019, 09:49:38 AM
-
Hi I have a
my headlights, taillights, Turn signals work.....the only light that does not work is the outside passenger rear signal, I checked the ground, bulbs, Traced wires, looked at wiring diagram, and any info I could find. Any ideas? Thanks Wayne
-
Sometimes hard to Find. The switch is working or Front would not Work.
-
The sockets used in the 49-50 Kaiser and Frazer cars, as well as the Darrins, were not well designed and corrode over time and as a result, connections are lost. Each pin in the socket is spring loaded and they lose their tension. So, while there may be voltage at the end of the line, the pin may not be making contact with the bulb itself. Adding a small bit of solder to the end of the pin to build up the surface solved that problem for me when troubleshooting issues with my 50 Kaiser.
-
Thank you for the insight I will try between the front working so I know I got power and the add a little Solder that makes some good sense. Great minds think a like so I’m glad I had you two guys thanks