Kaiser Frazer Owners Club Forum

General Category => Henry J & Allstate Forum => Topic started by: whatwouldjessedo on September 09, 2019, 12:02:07 PM

Title: Henry J rubber body mount pads
Post by: whatwouldjessedo on September 09, 2019, 12:02:07 PM

Hi all,
I need to replace the body mount pads on my Henry J. Has anybody found replacements? I haven;t pulled the old ones out yet, so I'm not sure, but are they just basic squares with a bolt hole in the middle?

~Jesse

Title: Re: Henry J rubber body mount pads
Post by: joefrazer on September 09, 2019, 01:46:23 PM

Yes, basically square with a hole in the center.

Title: Re: Henry J rubber body mount pads
Post by: MarkH on September 09, 2019, 06:10:30 PM

You don't mention thickness but I see one of my favorite "go to's", McMaster-Carr has rubber sheets & bars in a variety of compounds up to 3in thick.

Title: Re: Henry J rubber body mount pads
Post by: whatwouldjessedo on September 11, 2019, 02:43:55 PM

McMaster Carr is a good idea. I see they do have a lot to choose from.

I also was looking at the Summit Racing site and see that Energy has some universal square polyurethane pads that might work:

https://www.summitracing.com/nv/parts/ens-9-9534g/overview/

I also see that Rudy has body mount bushing in his catalog, but I haven;t been able to get a hold of him in a while.

~Jesse