Kaiser Frazer Owners Club Forum

General Category => Kaiser Forum => Topic started by: jmxkf1 on April 23, 2020, 11:03:04 PM

Title: 1953 Kaiser door handle spring replacement
Post by: jmxkf1 on April 23, 2020, 11:03:04 PM

Hi,
The front door handle doesn't spring back and I'd like to fix it.  I couldn't find instructions in shop manual for removal of the assembly.  I took off the door panel and see the handle with what looks like a piece of a broken spring showing.   The handle assembly is riveted together.   
How do I get the assembly out, if that's what is needed?     Can the spring be replaced ?   Any advice would be helpful.   thanks,  Jim

Title: Re: 1953 Kaiser door handle spring replacement
Post by: joefrazer on April 24, 2020, 06:30:21 AM

The spring can be replaced without removing the actuator assembly from the car. CAREFULLY spread the tabs apart to remove the broken spring. This is a very common problem with cars of this era. Check eBay for a replacement - KF club vendors may have them as well.

Title: Re: 1953 Kaiser door handle spring replacement
Post by: jmxkf1 on April 24, 2020, 04:18:48 PM

Thank you.  I'll look on Ebay for Kaiser parts and keep checking.  Can't reach Rudy for a part.