Kaiser Frazer Owners Club Forum

General Category => Kaiser Forum => Topic started by: stroker70 on July 30, 2011, 05:52:00 PM

Title: oil baffle location
Post by: stroker70 on July 30, 2011, 05:52:00 PM

What is the correct location for the oil baffles behind the valve cover? I have one engine that has a baffle in the rear and middle, and I have another engine with the baffles in the middle and the front. 53 226 engine

thanks

Title: Re: oil baffle location
Post by: Jim B PEI on July 30, 2011, 10:04:38 PM

Wouldn't baffles be there to reduce splashing an turbulence? If so, one would think that it would be on the inlet side, or by something like a breather /road draft tube hole which could cause turbulence. Interested in hearing the correct answer

Title: Re: oil baffle location
Post by: stroker70 on July 30, 2011, 10:59:58 PM

Anyone have the factory service bulletin # 198?  The answer is likely there

Title: Re: oil baffle location
Post by: joefrazer on July 31, 2011, 09:01:36 AM

#198 says front and center.

Title: Re: oil baffle location
Post by: stroker70 on July 31, 2011, 09:24:08 AM

Thank you Joe, mystery solved