Kaiser Frazer Owners Club Forum

General Category => Henry J & Allstate Forum => Topic started by: 55bern on December 05, 2012, 11:51:55 AM

Title: 51 henry J/s10 Frame
Post by: 55bern on December 05, 2012, 11:51:55 AM

Okay, I am new here. My car did not come with the original frame or motor etc. I am going to sit it on an s10 frame that I have almost completed(shortened etc.). I know the purists might not like this and I understand but as I am simply trying to work with what I have so I am not tearing up a complete car(I wouldn't do that).

Here is what I was wondering if I could get help with. I can move the motor(V8) forward nor problem and that will allow me to keep the 525 box and stock steering. But i was wondering if that would leave the motor too high for hood clearance?

My other option would be to notch the front crossmember and sit the engine down lower but i would have to redo the steering-probably a rack and pinion then. I would prefer keeping the stock steering setup as it would Be easier but I am fine lowering the engine if I NEED to for hood clearance as I already have a rack and pinion.

Anybody have any experience with using the s10 frame? There may have been other options but as i said the frame was already gone and I had the s10 frame already.

Thanks for any help!

Title: Re: 51 henry J/s10 Frame
Post by: alohagreen on December 05, 2012, 11:59:14 AM

you might want to Google  to see pictures of your same modification.

here is one to get you started
http://www.hotrodhotline.com/content/tommy-lee-byrd-1953-henry-j-rusto-rod

http://www.kaiserbill.com/Bills-Henry-J/image001.htm click to see s-10 frame

Title: Re: 51 henry J/s10 Frame
Post by: Fid on December 05, 2012, 12:21:17 PM

Kaiser Bill set a Henry J body on an S10 frame and he has a whole section on this website (www.kaiserbill.com) on how he did.
See

http://www.kaiserbill.com/Bills-Henry-J/image001.htm 

and use the arrows to navigate through it.
I know he had to modify the braces on the firewall that mounted the body to the original frame and that's shown on the site.
It's an excellent resource for someone who might want to do this type of modification.

Title: Re: 51 henry J/s10 Frame
Post by: joefrazer on December 06, 2012, 10:43:03 PM

Here's one on craigslist that's had an S10 swap...

http://detroit.craigslist.org/okl/cto/3371633408.html

Title: Re: 51 henry J/s10 Frame
Post by: Tom Campbell on December 10, 2012, 10:49:21 AM

FYI S 10 Blazer frame is the perfect wheel base for the henry-j no shorting required . S 10 pickup is 111 inches and blazer is 101 inches .