Kaiser Frazer Owners Club Forum

General Category => Parts For Sale & Wanted => Topic started by: joefrazer on August 12, 2014, 07:52:03 PM

Title: Wanted for my 54 HJ project
Post by: joefrazer on August 12, 2014, 07:52:03 PM

Well, now that I've been able to sort thru what's there, I've found alot that isn't. So, here's my wish list for my 54 HJ Corsair DeLuxe (6 cyl). I do have some 51 HJ stuff that I would be willing to use as trading material. Inquire.

- Overdrive cable and dash mount bracket
- Driver side horn mount bracket
- Passenger side front inner fender
- Air cleaner
- Grille mount brackets
- Driver side park light housing (NOS or very good used)
- Driver side tail light housing (NOS or very good used)
- Hood ornament (pot metal parts - I have the nose)
- Transmission and rear axle spicer style u-joint yokes

I know...it's quite a list but there might be someone out there with a few spares.

Title: Re: Wanted for my 54 HJ project
Post by: Jim G on August 15, 2014, 09:27:30 AM

  Hi Jim ,
Jim Gow , from Huron, ( we did some parts trading
A year or two ago )  I've got your inner fender, also
Have complete front suspension, with steering box
And a drive shaft , please give me a call
Four one nine six zero two 3389 ,  ( sorry old # is
No good as I had to go to cellular last year due to a
lot of special effects , give me a shout by phone,
   Thanks, regards , Jim

Title: Re: Wanted for my 54 HJ project
Post by: joefrazer on August 16, 2014, 05:09:29 PM

Thanks Jim...away from home for a few days. I'll call you soon!

Title: Re: Wanted for my 54 HJ project
Post by: Jim G on October 11, 2014, 12:53:18 PM

   Hi Jim,
Jim G here , let me know if you dont need
The inner and I'll post them in the for sale
section , got both inners 2 hood hinges
Core support  hood prop,steering box
complete front unbolt suspension
trans support tie rods sway bar ,Thanks again
 brother, 419 6 zero 2 three 389
Regards Jim

Title: Re: Wanted for my 54 HJ project
Post by: Corsairdeluxe on October 11, 2014, 02:13:40 PM

Jim G

I need the H J hood support clip that holds the hood support rod to the radiator shroud. It acts as a hinge If you have one ,I would appreciate it.

Title: Re: Wanted for my 54 HJ project
Post by: Fid on October 11, 2014, 06:48:17 PM

Be aware that some '53/'54 drive shafts are different than the '51.  If the '53/'54 does not have overdrive, it will have the other type of U-joints.  It's easy to modify but you need to know this if you're planning on swapping as you'll need to replace the companion flanges too.

Title: Re: Wanted for my 54 HJ project
Post by: joefrazer on October 12, 2014, 08:22:12 AM

My 54 was not originally equipped with OD so it now has Detroit style u-joints. I'd like to swap to the spicer style as that's the drive shaft I have, not to mention the simpler maintenance. I'm having a tough time finding the latter style flanges, however.

Title: Re: Wanted for my 54 HJ project
Post by: joefrazer on November 02, 2014, 07:48:02 AM

Had a great visit with Jim G yesterday and now have a few things crossed off my want list. He provided the grille/splash pan brackets and better inner fenders. His project is coming along nicely...I have to tell you I was impressed with the quality of his work.

Thanks Jim!

Title: Re: Wanted for my 54 HJ project
Post by: joefrazer on December 09, 2014, 05:26:43 PM

OK, I found a few more odds and ends for the project but I'm still looking for headliner bow clips. Has anyone any experience with using an alternative?

I've attached a picture of what I'm looking for.

Title: Re: Wanted for my 54 HJ project
Post by: Fid on December 09, 2014, 06:40:48 PM

Jim, have you tried contacting this seller?

http://www.ebay.com/itm/KAISER-HENRY-J-RIGHT-WINDOW-CRANK-CONTROL-REGULATOR-PROJECT-PARTS-GASSER-RAT-ROD-/361144583119?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5415e503cf&vxp=mtr

I got some odds and ends from him over the past two years. He likely has some - contact him through ebay and attach a picture.

Title: Re: Wanted for my 54 HJ project
Post by: joefrazer on December 14, 2014, 12:16:54 PM

Thanks to a fellow KFer, I now have the headliner clips I need. But, I'm still after the following for my 54HJ:

Left tail light housing
Headlight switch
Transmission and rear axle Spicer style yolks