Kaiser Frazer Owners Club Forum

General Category => Henry J & Allstate Forum => Topic started by: kfnut on October 01, 2015, 05:17:13 PM

Title: floor pans
Post by: kfnut on October 01, 2015, 05:17:13 PM

I am looking to get front floor pans to replace some nasty metal in my J . I see some on EBAY . Are there any other sources for them I could check out ?

Title: Re: floor pans
Post by: Henry's HenryJs on October 04, 2015, 08:06:32 PM

I bought mine at Rock auto.

Title: Re: floor pans
Post by: kfnut on October 05, 2015, 07:04:25 AM

Thanks for the reply . I was beginning to think no one had bought the pans before .
How well are you pleased with the ones you bought ? Any advice ?
Michael

Title: Re: floor pans
Post by: Henry's HenryJs on October 07, 2015, 07:37:52 AM

Not at that stage yet. Deciding which of the two to re-floor. They do look like good quality but I have never done a floor replacement so cannot say if they are good or bad.

Title: Re: floor pans
Post by: Quadromaniac on October 10, 2015, 11:37:52 PM

Got mine at Rock Auto. They are installed and I am driving the car. it was a lot harder than I thought but the fit was good. Along with inner and outer rockers.

Title: Re: floor pans
Post by: Vagabond Russ on October 11, 2015, 10:28:33 PM

Where are HJ floor pans listed at Rock Auto?  I can't find them.  Thanks. :(

Title: Re: floor pans
Post by: alohagreen on October 11, 2015, 11:22:48 PM

made by Sherman
https://www.shermanparts.com/ecat/base/dropdowns.php?make=Henry%20J&model=Henry%20J&year=1951

   ROCKER PANEL UNIV HENRY J 51-54   $110.29   $110.29   
Add

0
$0.00   Call for ETA   
       013CTC-942-020-1   A       ROCKER PANEL LH HENRY J 51-54   $44.12   $44.12   
Add

0
$0.00   Call for ETA   
       013CTC-942-020-2   A       ROCKER PANEL RH HENRY J 51-54   $44.12   $44.12   
Add

0
$0.00   Call for ETA   
       013CTC-942-440-1   A       FLOOR PAN FT LH HENRY J 51-54   $94.60   $94.60   
Add

0
$0.00   Call for ETA   
       013CTC-942-440-2   A       FLOOR PAN FT RH HENRY J 51-54   $94.60   $94.60   
Add

0
$0.00   Call for ETA   
       013CTC-942-445-1   A       FLOOR PAN RR LH HENRY J 51-54   $94.60   $94.60   
Add

0
$0.00   Call for ETA   
       013CTC-942-445-2   A       FLOOR PAN RR RH HENRY J 51-54   $94.60   $94.60   
Add

0
$0.00   Call for ETA   
       013CTC-942-770   A       TRUNK FLOOR FULL HENRY J 51-54   $494.12   $494.12   


https://www.rockauto.com/catalog/moreinfo.php?pk=6860272&cc=1442198&jnid=329&jpid=0

https://www.rockauto.com/catalog/raframecatalog.php?ck[billing]=undefined&ck[shipping]=undefined&ck[year_1995]=true&ck[mkt_US]=true&ck[mkt_EU]=false&ck[mkt_CA]=true&ck[mkt_MX]=false&ck[PHPSESSID]=dp322olobf9lekeg1egt6aams5&ck[osID]=18am67n78omr415m8vd1oko8v2&ck[ralogin]=9c450dc6c3fd2b993fb40d9fe14b4ee3&ck[viewcurrency]=USD&ck[ID]=0&ck[idlist]=0&ck[PHP_SESSION_ID]=dp322olobf9lekeg1egt6aams5

Title: Re: floor pans
Post by: kfnut on October 12, 2015, 07:27:08 PM

Thanks for the replies . I knew someone would have other options.

Title: Re: floor pans
Post by: Quadromaniac on October 12, 2015, 07:36:54 PM

They are not on Rock auto any more. Try using Classic 2 Current. That is what was on the box when they arrived.

Title: Re: floor pans
Post by: alohagreen on October 12, 2015, 07:54:07 PM

i found them in ROCK auto but listed as not in stock....
 they buy them from sherman anaway...  8)

Title: Re: floor pans
Post by: kfnut on November 25, 2015, 09:36:20 PM

I tried the pans from " CLASSIC PARTS 4U " as found on EBAY . They don't fit at the transmission tunnel at all . I told the seller and they refunded the purchase price and had them picked up by FEDEX so I didn't have any shipping cost so I can't complain about the company . There other KF items may fit fine but the Henry J pans don't .