Kaiser Frazer Owners Club Forum

General Category => Parts For Sale & Wanted => Topic started by: Mike Richards on March 21, 2016, 08:29:13 AM

Title: shift linkage bushings wanted
Post by: Mike Richards on March 21, 2016, 08:29:13 AM

Anybody know of a source for the bushings that go on the upper end of the linkage rods near the steering box? mine are missing, 53 henry j

Title: Re: shift linkage bushings wanted
Post by: Vagabond Russ on March 21, 2016, 05:53:46 PM

The steering column gear shifter, or H Box, is a Chevy item.  Check out a 1950's Chevrolet parts supplier.  Fits 1949-54 car and 1948-59 truck.  Lots of Henry J components were used on other makes.

Title: Re: shift linkage bushings wanted
Post by: Mike Richards on March 21, 2016, 06:26:04 PM

Thanks!

Title: Re: shift linkage bushings wanted
Post by: Fid on March 22, 2016, 08:23:10 PM

I don't know what part(s) you are asking about.  Are they shown in this diagram?

(https://im1.shutterfly.com/media/47a6dd35b3127cceebc9c3a7750200000030O01SatmLdmyB7efAA/cC/f%3D0/ls%3D00203070160520160314223831985.JPG/ps%3D50/r%3D0/rx%3D550/ry%3D400/)

If so, let me know the number - I may have them.

Title: Re: shift linkage bushings wanted
Post by: Mike Richards on March 22, 2016, 09:23:21 PM

Hey thanks Fid, I'd say #3, the two shift rods that come up from the levers on the tranny go into the levers that come off the steering column, the bushing are missing on my 53, just finding the little things as I have it all apart,let me know, thanks again, Mike

Title: Re: shift linkage bushings wanted
Post by: Fid on March 22, 2016, 09:32:33 PM

I'm pretty sure I have them. I won't be out to the shed where they're stored for a few days, maybe  a week or so.  If you find some in the meantime, don't hesitate to grab them up, otherwise when I get out there I'll see if I can find them.

Title: Re: shift linkage bushings wanted
Post by: Mike Richards on March 22, 2016, 10:06:32 PM

Thanks Fid, no rush, keep me posted, Mike

Title: Re: shift linkage bushings wanted
Post by: Vagabond Russ on March 23, 2016, 10:22:04 AM

Here you go:

https://www.chevsofthe40s.com/detail/34313/Shift_Rod_Grommet_Shift_Rod_To_Steering_Column.html

Title: Re: shift linkage bushings wanted
Post by: Mike Richards on March 23, 2016, 12:02:29 PM

Thanks Russ

Title: Re: shift linkage bushings wanted
Post by: vt2000driver on April 01, 2016, 06:52:30 AM

the same grommets from LMC TRUCK part #30-1282

Title: Re: shift linkage bushings wanted
Post by: Mike Richards on April 01, 2016, 03:24:24 PM

Thanks