Kaiser Frazer Owners Club Forum

General Category => Willys Forum => Topic started by: pnw_oldmags on September 15, 2016, 07:39:16 PM

Title: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on September 15, 2016, 07:39:16 PM

Working on bringing online some Willys Aero Manuals. 
Here is the first Parts Manual for your enjoyment and reference.   
This one is Parts peculiar to 1954-1955 Passenger Cars.
This is a supplement to the 1952-1953 Willys Passenger Car Parts List.

http://circlekf.com/sourceslideb.php?pub=WM&typ=PM&nbr=840&pag=1

Working on the 1952-1953 Willys Passenger Car Parts List next ... all 400 plus pages and photos.

Title: Re: CircleKF stepping up to Willys Support
Post by: MarkH on September 15, 2016, 07:57:59 PM

Wow, that is not a small task.

Kudos to you for taking the time and expense to make this valuable info available to everyone!

Title: Re: CircleKF stepping up to Willys Support
Post by: WillysTom1 on September 23, 2016, 11:19:17 AM

Thanks! Thanks! Thanks!

Title: Re: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on September 23, 2016, 06:45:08 PM

The 52 - 53 Parts Manual is very large.  Now up to page 160.

http://circlekf.com/sourceslide.php?pub=WM&typ=PM&nbr=800&pag=1

Very interesting group of Parts Numbers.  Great photos of almost everything.

Title: Re: CircleKF stepping up to Willys Support
Post by: jbailey on September 23, 2016, 09:08:05 PM

Jim:

Great job!  I will have to get a clean copy of the 1952 - 1953 Willys Passenger Car Parts List for myself to thumb through.

John B.

Title: Re: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on September 24, 2016, 11:34:06 AM

Have a brand new 52-53 manual but did not wish to remove the staples for the scan.  Besides the experienced one is readable - Stains and All.

Title: Re: CircleKF stepping up to Willys Support
Post by: Aeroman on October 01, 2016, 02:46:05 PM

As far as I can tell, there were two preliminary Aero parts books (1952 - 685 and 675), one 1952 Wing and Ace (685) book (there may also be a regular issue 675 book but I have not seen one), one passenger car parts manual (1953) and three supplements (1954, 1954-1955 [c 1955] and 1954-1955 [c 1956]. pics of covers attached.

Title: Re: CircleKF stepping up to Willys Support
Post by: Aeroman on October 01, 2016, 02:47:36 PM

and the last supplement. There were also two Hydramatic parts lists, pics attached.

Title: Re: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on October 01, 2016, 10:44:21 PM

We are working on scanning the 400 page one.  Scanned the first 300 pages so far.

http://circlekf.com/sourceslide.php?pub=WM&typ=PM&nbr=800&pag=1

Aeroman:  Do you have all of the parts manuals you have shown?

Title: Re: CircleKF stepping up to Willys Support
Post by: Aeroman on October 06, 2016, 05:08:41 PM

Yes I do, Jim. Which ones do you need for scanning, I'll send them. I can't get that one sales book finished, so I'm not gonna start another project like that.

Title: Re: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on October 06, 2016, 10:01:51 PM

The latest Supplement for the 54-55 models for sure.

If you could use the LOOKUP Part Number function in the Parts Dept and test a few parts from each of the Parts Manual. 

If it does not find the part ... then I best get that part manual scanned and keyed in.

I am assuming the big one covered all previous manuals and the last supplement should cover it for us.

THANKS.

Jim

Title: Re: CircleKF stepping up to Willys Support
Post by: pnw_oldmags on October 07, 2016, 11:55:53 AM

Parts Manual now online at CircleKF - All 415 Pages of it.

http://circlekf.com/sourceslide.php?pub=WM&typ=PM&nbr=800&pag=1

Title: Re: CircleKF stepping up to Willys Support
Post by: Aeroman on October 25, 2016, 02:37:31 PM

There were several update bulletins to various pages in the big parts manual. My manual has those blue inked "ditto" pages cut and taped to various pages. I have not found sources for these. Perhaps I should scan them and send them to you. As you know and as with everything I do - when I get the time.

And thanx so much for doing this.