Kaiser Frazer Owners Club Forum
General Category => Darrin Forum => Topic started by: pinetintgreen on January 07, 2017, 04:59:32 PM
-
Has anyone ever removed the hood release from their Darrin. I have the female receiver unbolted from the engine bay area and the t-handle has been unbolted from under the dash and neither end is small enough to pass through the firewall. If I cut the cable, it will be no good. Has anyone ever done this before?
-
The cable needs to be disconnected from the receiver. Check the end of the cable, there's probably a small circular keeper that prevents the cable from pulling back thru the hole in the receiver's arm. You'll need to remove the keeper.