1
Kaiser Forum / Re: access to master cyl and auto trans filler caps 54 KM
« on: September 28, 2020, 08:53:20 AM »
The NUTS and BOLTS will be on TV tomorrow night during the debates. Please watch and see what you prefer.
News:
Join the KF Club Forum to find answers to your questions and help others answer theirs!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
General Discussion / Re: Larry Smith #238 - Hospice
« on: September 14, 2020, 06:00:38 AM »
I'm very sorry to hear this news. Larry and I had many discussions about parts, and I knew from a conversation a couple of years ago that he was facing a tough medical situation. I'm praying for him to have the best quality of life possible at this time moving forward. It seems my friends are leaving us, but none of us gets a pass. God bless Larry and his family, and hopefully he will find a good way forward. I love you Larry!
3
Kaiser Forum / Re: carb spacer
« on: June 16, 2020, 05:28:07 PM »
I am unable to open your .jpg files with any software I have.
4
General Discussion / Re: New club YouTube channel
« on: May 29, 2020, 07:03:42 AM »
Great new member and marketing idea.
The interview is wonderful.
Glad to see younger guys getting in.
Jerry
The interview is wonderful.
Glad to see younger guys getting in.
Jerry
5
Kaiser Forum / Re: Source for hood springs?
« on: February 29, 2020, 08:40:26 AM »
Hello,
I think you can get them from Dave Hollen.
He lives in Glascow, PA.
His phone number is 814-687-4446.
Email: dch1@psu.edu
He was generous with me and I bought several parts from him.
A really nice guy.
Please let me know if you make contact with him and how he helps you.
Have a great day,
Jerry Wilbeck
972-771-3883
I think you can get them from Dave Hollen.
He lives in Glascow, PA.
His phone number is 814-687-4446.
Email: dch1@psu.edu
He was generous with me and I bought several parts from him.
A really nice guy.
Please let me know if you make contact with him and how he helps you.
Have a great day,
Jerry Wilbeck
972-771-3883
6
Kaiser Forum / Re: Source for hood springs?
« on: February 26, 2020, 08:01:08 PM »
Call the guy on Pennsylvania with all the car parts.
7
Kaiser Forum / Re: Bumper/carriage bolts
« on: February 15, 2020, 08:08:23 AM »
You can get these at this website:
https://www.chevsofthe40s.com/detail/10571/Chevrolet_Bumper_Bolt_Original_Oval_Head_With_Standard_Nut.html
https://www.chevsofthe40s.com/detail/10571/Chevrolet_Bumper_Bolt_Original_Oval_Head_With_Standard_Nut.html
8
Kaiser Forum / Re: orientation of brake shoes-1953 Kaiser
« on: August 20, 2019, 08:46:51 AM »
Hello,
I had my drums machined and the shoes were attached to my existing metal by a supplier to Carquest Auto Parts, 306 East Main St., Royse City, TX 75189. Their phone number is 972-636-5611. It will cost you some shipping, but the end results will be OK if yours turn out like mine. You must specify "soft linings".
Jerry
I had my drums machined and the shoes were attached to my existing metal by a supplier to Carquest Auto Parts, 306 East Main St., Royse City, TX 75189. Their phone number is 972-636-5611. It will cost you some shipping, but the end results will be OK if yours turn out like mine. You must specify "soft linings".
Jerry
9
Kaiser Forum / Re: orientation of brake shoes-1953 Kaiser
« on: August 19, 2019, 09:24:32 AM »
I was advised to buy "softer" shoes than can be obtained from NAPA or other stores. I was able to get them from another source in my area, and the brakes work fine. I suspect that the older NOS shoes were made from asbestos. The US Government has regulated those parts out of American suppliers of shoes, so I'm almost certain I have Chinese Asbestos brake shoes on my car now.
10
Kaiser Forum / 1948 Frazer special
« on: August 19, 2019, 09:20:33 AM »
Hello,
If you have trouble finding the parts you need, try contacting Mr. Paul Boehm, Mr. Adam Harder, or Mr. Dave Hollen (1-814-687-4446). They have several older cars that may serve your needs.
Jerry
If you have trouble finding the parts you need, try contacting Mr. Paul Boehm, Mr. Adam Harder, or Mr. Dave Hollen (1-814-687-4446). They have several older cars that may serve your needs.
Jerry
11
General Discussion / Re: 226 CI Motor Mounts
« on: August 05, 2019, 11:54:24 AM »
Thank you sir,
Please confirm the dimensions of the thickness of the parts and the dimensions of the holes.
Have a great day,
Jerry
Please confirm the dimensions of the thickness of the parts and the dimensions of the holes.
Have a great day,
Jerry
12
General Discussion / Re: 226 CI Motor Mounts
« on: August 05, 2019, 11:01:09 AM »
Thank you sir,
I am really wanting to know the exact thickness, mounting dimensions, and part numbers (KF) for the 47-48 front, rear, and transmission mounts.
Hopefully, someone will be able to provide me with that substantiated information.
Have a great day,
Jerry
I am really wanting to know the exact thickness, mounting dimensions, and part numbers (KF) for the 47-48 front, rear, and transmission mounts.
Hopefully, someone will be able to provide me with that substantiated information.
Have a great day,
Jerry
14
General Discussion / Re: 226 CI Motor Mounts
« on: August 04, 2019, 05:28:55 PM »
Jim,
Would it be possible for you and Chris to get some very good photos and measurements of the front, rear and transmission mounts for the 47-489 cars and provide that to us so we can get them corrected? We would really like to have that knowledge if it is available.
Thanks,
Jerry
Would it be possible for you and Chris to get some very good photos and measurements of the front, rear and transmission mounts for the 47-489 cars and provide that to us so we can get them corrected? We would really like to have that knowledge if it is available.
Thanks,
Jerry
15
General Discussion / Re: 226 CI Motor Mounts
« on: August 04, 2019, 04:44:57 PM »
Hello Jim,
The enclosed photos are of two that I have.
The solid mount is about 0.1 inches taller than the one with the cutout.
The number on the solid mount is 213100. Do you have a parts list that I can check to verify that number please? Also, is either of these applicable for the transmission mount for a 47 or 48 car? Where can I verify that info, also?
Jerry
The enclosed photos are of two that I have.
The solid mount is about 0.1 inches taller than the one with the cutout.
The number on the solid mount is 213100. Do you have a parts list that I can check to verify that number please? Also, is either of these applicable for the transmission mount for a 47 or 48 car? Where can I verify that info, also?
Jerry