Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Howard Wade

Pages: [1]
1
Kaiser Forum / Model and year
« on: March 21, 2023, 04:03:38 PM »
Hello could some one tell me the model and yeR of my kaiser manhatton. On the id plate it starts with.
F496-007600. Thanks

2
Kaiser Forum / Hub Keyway
« on: October 25, 2022, 12:48:20 PM »
Hello On a Kaiser rear hub, there is a taper key, what way does the key go into the hub. Thank you.

3
Kaiser Forum / Re: Frazer Manhatton
« on: October 12, 2022, 04:15:27 PM »
Hello All, not really sure where to go from here, will have another look to see if i can see anything. Thanks

4
Kaiser Forum / Re: Frazer Manhatton
« on: October 09, 2022, 04:42:03 PM »
Well I got to look at the half shafts today and there is now end play, so not sure at all of the cause any other suggestions. Thanks

5
Kaiser Forum / Re: Frazer Manhatton
« on: October 05, 2022, 01:48:56 PM »
hello I will take a look at the end play in the morning. Thank you. Howard

6
Kaiser Forum / Re: Frazer Manhatton
« on: October 05, 2022, 01:38:58 AM »
Hello, No the backing plates have not been touched neither any other parts, only items removed were the drums, and yes i have the problem on both sides. Thanks

7
Kaiser Forum / Re: Frazer Manhatton
« on: October 04, 2022, 01:47:38 PM »
Hello Again, the brake shoes are the original shoes but relined. The drums dont rubb on the braking surface they rubb on the outer edge of the shoes when you tighten up the drum. I used a proper hub puller to remove the drum.  the problem is almost as if the drum is going in to far. The problem I have is finding what is warn, is it the axle or is it else where. Thanks

8
Kaiser Forum / Re: Frazer Manhatton
« on: October 03, 2022, 02:20:48 PM »
Hello Terry, Sorry what do you mean by Re-arc the shoes.
Thanks Howard

9
Kaiser Forum / Frazer Manhatton
« on: October 03, 2022, 01:35:47 AM »
Hello, i have recently fitted aa new set of brake shoes and brake cylinders, refitted the drums to the front with no problems, however when i fit the rears the drums are rubbing on the edge of the brake shoe, it appears that the drum is going on to far, which suggests to me that either the taper in the drum is warn or the taper on the half shaft is warn, has any body else had this problem, if so what is the fix do frazer make a shim. Thanks Howard

10
Frazer Forum / Frazer Manhatton 1949
« on: March 25, 2022, 01:53:04 PM »
Hello Guys, I have recently got a 1949 Frazer manhatton, which had stood indoors in a car collection for some time, sadly there were no keys for the car, does any body know where i might get some keys did that ever make a universal key for the frazer, or can i get a new ignition with keys from some where.

Many Thanks Howard

Pages: [1]