« previous next »
Pages: [1]

Author Topic: Valve adjustment  (Read 1125 times)

brian.b

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
    • Email
Valve adjustment
« on: August 30, 2016, 11:34:51 AM »
Hey guys when you adjust the valves on these cars do you take the intake and exhaust manifolds off....Is there an easier way......and does anyone have a diagram on adjusting them
Logged
whatever you do in life,always give 100%.unless your're donating blood.

brian.b

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
    • Email
Re: Valve adjustment
« Reply #1 on: August 30, 2016, 01:03:28 PM »
Ok can you use just regular wrenches on this or do you actually need special wrenches....... 
Logged
whatever you do in life,always give 100%.unless your're donating blood.

brian.b

  • Sr. Member
  • ****
  • Posts: 280
    • View Profile
    • Email
Re: Valve adjustment
« Reply #2 on: August 30, 2016, 01:38:11 PM »
Did your comments get removed.......
Logged
whatever you do in life,always give 100%.unless your're donating blood.

joefrazer

  • Hero Member
  • *****
  • Posts: 4043
    • View Profile
Re: Valve adjustment
« Reply #3 on: August 30, 2016, 02:36:52 PM »
The manifolds can stay in place. There are special wrenches one can use to adjust the valves...they're thinner than standard but you can use regular ones.
Logged

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: Valve adjustment
« Reply #4 on: August 30, 2016, 10:35:20 PM »
Look on ebay for a set of Tappet Wrenches.  They were common in the old flathead days. Chances are you'll find the set you need among these.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1311.R1.TR12.TRC2.A0.H0.Xtappet+.TRS0&_nkw=tappet+wrench&_sacat=0


I don't remember the size required off hand. Perhaps Joe can elaborate on that.
« Last Edit: December 23, 2016, 09:44:10 AM by Fid »
Logged
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios
Pages: [1]
« previous next »