« previous next »
Pages: [1]

Author Topic: Hood bolts  (Read 781 times)

Orphanauto

  • Full Member
  • ***
  • Posts: 172
    • View Profile
    • www.orphanauto.webs.com
    • Email
Hood bolts
« on: June 01, 2018, 08:29:34 PM »
While driving, one of my hood bolts came out. Now I have to use a board to hold up the hood. This is in a 53 Manhattan. Are these just regular bolts? If so, what size and does it need a nut? Are they special type. If so does anyone have one? Hope the photos help. The bolt is from the bottom of the back rod going into the side of the cowl body.
« Last Edit: June 01, 2018, 08:32:34 PM by Orphanauto »
Logged
1953 Kaiser Manhattan 4-door

superk226

  • Full Member
  • ***
  • Posts: 168
    • View Profile
    • Email
Re: Hood bolts
« Reply #1 on: June 01, 2018, 09:48:55 PM »
I think you lost a rivet, not a bolt. Look at the hinge on the other side and see if it is a bolt or a rivet. If it is a rivet, you can patch it back together with a bolt and a self locking nut. Be careful not to over tighten the nut if you patch it back together with a bolt and nut.
Logged
Pages: [1]
« previous next »