Author Topic: exhaust pipe routing  (Read 20074 times)

kfnut

  • Sr. Member
  • ****
  • Posts: 300
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #30 on: June 04, 2012, 09:07:42 PM »
Talked to Jack at Klassickollections last tuesday and informed him of the problems i was having with the pipe . He told me to give him a day or two to look at the situation and call him back . I left Wed. morning for a USS DYESS reunion and returned Sunday . Today i called him and he said he had not found the right pipe among the over 3000 he had samples of and to give himm a couple more hours and he would call me . He did and informed me he indeed had sent the wrong pipe and was shipping the right one out today . When i get the pipe i will fit it to the engine and see how it looks before installing the engine . Will let you know .

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #31 on: June 04, 2012, 09:19:54 PM »
Great news and by all means let us know. If it's the correct one, I may get one myself.
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

AZ_HJ

  • Sr. Member
  • ****
  • Posts: 389
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #32 on: June 05, 2012, 12:25:02 PM »
I would purchase one as well. I think the demand for this item is more than what we all thought. If they can get it right, I am sure they would see mutiple orders. I would certainly spread the word once they get it right.
« Last Edit: June 05, 2012, 04:48:21 PM by AZ_HJ »
1948 Willy CJ2A Jeep
1952 Henry J Vagabond Deluxe
1953 Kaiser Traveler Deluxe

kfnut

  • Sr. Member
  • ****
  • Posts: 300
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #33 on: June 09, 2012, 08:07:26 PM »
I recieved the new pipe from Klassiccollections and it fit like it should . I dealt with a fellow named Jack and he was most helpful . I highly recommend them for the way they addressed the problem i had and made it right . I will do business with them again . I took a few pictures of the install and will try to post them if anyone wants to see them .

Skipplehammer

  • Newbie
  • *
  • Posts: 31
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #34 on: June 10, 2012, 08:26:36 AM »
WOW!  That is great to learn they were able to correct the problem.  I'm anxious to see the photos.  I need a complete set of pipes and muffler.  Did they use the correct diameter of pipe?
1951 Henry J.
6 cyl, O/D
KFOCI # 5949

joefrazer

  • Hero Member
  • *****
  • Posts: 4043
    • View Profile
Re: exhaust pipe routing
« Reply #35 on: June 10, 2012, 08:54:20 AM »
Good! Now, that means you'll have the car at the national next week, right? Hope to see you there!

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #36 on: June 10, 2012, 01:28:27 PM »
I'm going to probably grab one up now. Thanks, and I'm glad you're good to go.
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

51HJ

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #37 on: June 11, 2012, 04:17:02 PM »
Is the tail pipe one piece or two?

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #38 on: June 11, 2012, 05:42:03 PM »
There is one pipe from the manifold to the muffler (header pipe) and one pipe from the muffler back (tail pipe).
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

kfnut

  • Sr. Member
  • ****
  • Posts: 300
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #39 on: June 11, 2012, 09:47:45 PM »
The pipe from the muffler to the rear was in two pieces . Probable for shipping reasons but it worked out fine for me .

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #40 on: June 12, 2012, 06:37:14 PM »
Was this the vendor that now has the correct part?
http://www.ebay.com/itm/1951-54-HENRY-J-EXHAUST-FRONT-PIPE-OR-TAILPIPE-ALUM-/350573997136?pt=Vintage_Car_Truck_Parts_Accessories&hash=item519fd6ac50&vxp=mtr

What made me leary, and still does, is the ad says "Picture #1 is our 4 cylinder pipe..." which it cannot possibly be, and "...picture #2 is our six cylinder..." which it cannot possibly be as the HJ pipe, for either engine, has no horizontal curvature as that one does.
Here's what a four cylinder pipe looks like -

The one that the ad claims is for a 4, looks a lot like the pipe for a six.
« Last Edit: June 12, 2012, 06:40:39 PM by Fid »
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Skipplehammer

  • Newbie
  • *
  • Posts: 31
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #41 on: June 19, 2012, 08:23:48 PM »

Does Klassik finally have the problem resolved for your 51 Henry J exhaust system?  I need to buy a complete  system for my 51 Henry J, but do not want to take the engine out, or the body off the frame to install it.
1951 Henry J.
6 cyl, O/D
KFOCI # 5949

kfnut

  • Sr. Member
  • ****
  • Posts: 300
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #42 on: June 23, 2012, 08:44:14 AM »
Just got back from the Nationals in TN. so could not reply . THe engine was installed and i had the clutch linkage and shifter rods in but i did not have the steering linkage installed . The pipe went in easy bring it in from the front over the rear cross member . I don't know how hard it would be with the steering linfage in . I did have to twist the pipe at differant angles to get it in but still not hard . Dropping the steering linkage is not a big deal if it has to be done . My problem now is finding that darn clamp i misplaced that holds it to the bellhousing . I probable never had one as the pipe that was on it was not the original shape . It was something someone fabricated to get by . I may be calling for help to find one . One more thing . You may want to remove the overdrive solenoid , if present , to make things easy .

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #43 on: June 23, 2012, 11:05:28 AM »
If you can't find that piece that clamps the exhaust pipe, it would be easy to make one. It's flat strap steel with one bend and two holes.  I can post pictures if you need. 
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

kfnut

  • Sr. Member
  • ****
  • Posts: 300
    • View Profile
    • Email
Re: exhaust pipe routing
« Reply #44 on: June 23, 2012, 04:35:35 PM »
Fid . It would be nice to see the pictures and maybe get some dimensions . I took a picture of the exhaust pipe from the muffler to rear of car as requested .