Author Topic: Engine Seized  (Read 6528 times)

carbuff1941

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Email
Re: Engine Seized
« Reply #15 on: January 23, 2015, 05:27:44 PM »
I have just found out from the previous owner that the rebuilt engine that came with the car is out of a 1950 Frazer.  It has a manifold for a 2bbl carb but no carb.  Can I put my 1 bbl carb and manifold on this engine and if so what effect will it have on the performance of the engine, assuming I ever get it running?

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: Engine Seized
« Reply #16 on: January 23, 2015, 05:33:37 PM »
I believe the Frazer Manhattans had a higher compression head as well. Not sure on that but hopefully someone can speak to both issues for you.
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

carbuff1941

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Email
Re: Engine Seized
« Reply #17 on: January 28, 2015, 12:42:57 PM »
Does anyone have any thoughts about puting the 1bbl carb on this 1950 engine that had a 2bbl carb?

joefrazer

  • Hero Member
  • *****
  • Posts: 4043
    • View Profile
Re: Engine Seized
« Reply #18 on: January 28, 2015, 02:17:27 PM »
Do it. Swapping manifolds will have no effect on compression.

superk226

  • Full Member
  • ***
  • Posts: 168
    • View Profile
    • Email
Re: Engine Seized
« Reply #19 on: January 28, 2015, 10:26:39 PM »
The one barrel manifold uses a different exhaust pipe than the two barrel manifold so you will need to change that also.

carbuff1941

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Email
Re: Engine Seized
« Reply #20 on: April 14, 2015, 10:18:19 AM »
Still in the process of dismantling the front of this 1947 Frazer Manhattan for the engine swap.  After removing the generator, oil filter canister and battery support I noticed what appears, to me, to be a wire running from one of the harnesses into the bottom of the steering gear box.  I'm I crazy or does this do something?  I can see no reference to this wire on the wiring diagram.  There are also, what look like, two relays for the horns but the wiring diagram only shows one.  In fact there are a number of wires in the engine compartment that don't show up on the wiring diagrams.  Any thoughts would be appreciated.

joefrazer

  • Hero Member
  • *****
  • Posts: 4043
    • View Profile
Re: Engine Seized
« Reply #21 on: April 14, 2015, 11:07:20 AM »
That's the horn wire.