« previous next »
Pages: [1]

Author Topic: need '51 Henry J hood ornament waffle clip  (Read 1379 times)

51HJ

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • Email
need '51 Henry J hood ornament waffle clip
« on: July 13, 2015, 02:26:55 AM »
I need a good waffle clip that holds the plastic cone to the hood ornament spear on a '51 Henry J. Or tell me what will work. Thanks
Logged

Terry T

  • Hero Member
  • *****
  • Posts: 1217
  • EX--Editor Darrin Newsletter/Registry
    • View Profile
    • Email
Re: need '51 Henry J hood ornament waffle clip
« Reply #1 on: July 13, 2015, 07:15:39 AM »
What be waffle clip?

Cone was originally held on with a drive pin.
Small wood screw works fine.
Logged

mbflemingkf

  • Hero Member
  • *****
  • Posts: 812
    • View Profile
    • Email
Re: need '51 Henry J hood ornament waffle clip
« Reply #2 on: July 13, 2015, 11:23:15 AM »
Terry, he's talking about the cone not the tip.  Its a clip (of sorts)  that slides between the bottom plastic slot on the cone and the chrome base that mounts to the hood.

With some patience I've heard you can make one from a piece of metal strapping.

Sorry I don't have one.
Logged
KFOCI #4818, Since 1982

Rear view mirror:
1954 Kaiser Manhattan, 4 Door (Now in FL)
1955 Kaiser Manhattan, 2 Door (Now in TX)
1953 Kaiser Manhattan, 4 Door (Now in Australia)
Thousands of parts & literature (All over the world)

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: need '51 Henry J hood ornament waffle clip
« Reply #3 on: July 13, 2015, 11:36:10 AM »
I think I have one. Part number 212042, spring - hood ornament ring to body
I'm in LA right now, when I get home I'll check.
Logged
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

Fid

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
    • Email
Re: need '51 Henry J hood ornament waffle clip
« Reply #4 on: July 17, 2015, 10:56:32 AM »
It's this one. It would be very easy to make one. It's .030" thick material, 2 1/8" long by 7/16" wide. Cut out 1/4" gap 1 1/4" deep and you got it.
I'm sending this one to you Steve.
« Last Edit: July 17, 2015, 11:13:15 AM by Fid »
Logged
1953 Henry J Corsair Deluxe
Edgar Kaiser's custom 1951 Henry J
1951 Kaiser Special
1952 Allstate Deluxe

Need your classic car radio repaired? I repair vacuum tube radios

51HJ

  • Full Member
  • ***
  • Posts: 125
    • View Profile
    • Email
Re: need '51 Henry J hood ornament waffle clip
« Reply #5 on: July 17, 2015, 10:23:15 PM »
Thank you very much.
Logged
Pages: [1]
« previous next »