« previous next »
Pages: [1] 2

Author Topic: need carb part  (Read 3513 times)

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
need carb part
« on: September 20, 2016, 04:37:05 PM »
If you have one....  a carb to part out ...please respond


need carb part 51 henry j 161ci 
the FLAT bracket with a bolt that clamps it on
the throttle shaft
....so that the
round rod can attach for opening movement...
i will attempt to show  a picture or 2 ....
thanks

in the LOWER pic it is the right side BENT piece


will show pictures as soon as i can
« Last Edit: September 20, 2016, 05:27:32 PM by alohagreen »
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #1 on: September 21, 2016, 02:05:36 AM »
yes... i think so.... the part or parts that slip/bolt on to the throttle shaft


bent twice out of flat metal...
and or  i could FAB/weld something out of 2 or 3 of those parts

answer is   YES...
 
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #2 on: September 21, 2016, 02:34:45 PM »
the bent piece near the bottom ON  the throttle shaft
« Last Edit: September 21, 2016, 03:13:38 PM by alohagreen »
Logged
alohageen is here to help,
a little help goes a LONG way...

TotallyT

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: need carb part
« Reply #3 on: September 21, 2016, 06:21:33 PM »
This one?
Logged

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #4 on: September 22, 2016, 02:18:18 PM »
somebody must have one
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #5 on: September 22, 2016, 11:27:54 PM »
yes sir...that is it
just like the one in the background

the 100 you spoke of ..that wouldn't be for a carb ...? would it...?

shown below is MY exact carb missing that  ARM
« Last Edit: September 22, 2016, 11:33:51 PM by alohagreen »
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #6 on: September 22, 2016, 11:34:52 PM »
wow its a nice one thats for sure
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #7 on: September 22, 2016, 11:37:53 PM »
i do not NEED the whole CARB
just that bracket / arm... that you have circled ...
and in your picture there's  one in the background
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #8 on: September 22, 2016, 11:45:01 PM »
ah SAD.... i ONLY NEED that SMALL arm/bracket... i do not NEED any other or more parts...
« Last Edit: September 22, 2016, 11:49:32 PM by alohagreen »
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #9 on: September 22, 2016, 11:51:16 PM »
i think its a 722 witha 648 base
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #10 on: September 22, 2016, 11:59:27 PM »
that's KQQL---- but i ONLY need a small PART.... not the WHOLE carb....
i'll check with them tom or row....
thanks JAKE
Logged
alohageen is here to help,
a little help goes a LONG way...

Henry's HenryJs

  • Sr. Member
  • ****
  • Posts: 432
    • View Profile
    • Email
Re: need carb part
« Reply #11 on: September 23, 2016, 08:33:28 AM »
Here is a picture of what one fellow did for carb linkage.
Logged
2-51 HenryJ's, 57 wagon 408"BB with 14' Bonair travel trailer,71 Nova 355"SB, 07 2500HD with 26.5 Prowler 5th wheel travel trailer, CDN coordinator for ChevyTalk
http://www.picturetrail.com/gallery/view?username=h

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #12 on: September 23, 2016, 11:47:40 PM »
I'm just goint to FAB my own ARM/BRACKET....

it will work just fine....
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #13 on: September 25, 2016, 10:24:51 PM »
un locked....
i would /could use the PROPER 833 carb ....
and then i could help  out the guy that IS LQQKin for the one i have....

(even i'm confused now ...lol)
Logged
alohageen is here to help,
a little help goes a LONG way...

alohagreen

  • Sr. Member
  • ****
  • Posts: 278
    • View Profile
    • Email
Re: need carb part
« Reply #14 on: September 25, 2016, 11:36:15 PM »
I can sell / trade my 820 for the 833....
Logged
alohageen is here to help,
a little help goes a LONG way...
Pages: [1] 2
« previous next »