STUCK REAR BRAKE DRUM

[Terry T]

I've squired PB Blaster
Wrenched on drum puller
Tapped on drum
More PB
Cranked on puller some more
NO GO ON DRUM COMING OFF

WHAT'S NEXT THAT WORKS?

[MarkH]

I struggled for a couple days with no success on my Aero hubs with a small hub puller that only matched 2 lugs, as well as heating with a torch.
A buddy borrowed a puller very much like the one in this vid that bolted to all 4 lugs. It worked, but took a lot of hammering with an even bigger hammer.

All the small 2 lug puller did was warp the crap out of what had been a perfectly good set of hubs. Fortunately I had a spare axle and pulled those hubs undamaged with the heavy duty puller.

If you don't have one, rent, borrow or buy a 4 lug with a large diameter screw..

https://www.youtube.com/watch?v=PQQvFK4B6pY

[Terry T]

2  things---I have one of the pullers but too big for HJ hubs--i'm using one with a 3 leg web that the bolts go thru

        2nd--he failed to put the axle nut back on before hammering on the puller--that can mushroom the threads on the axle.
      additionally, the nut will prevent the hub and puller from flying across the room once it brakes loose

[G.B. (All Vinyl Dragon)]

I was Showed to adjust Brake shoes back off drum.
Then hit on the Left & Right side with a sledge. Then keep piling on drum pull it Off.

Puller is Good Idea. Everyone I know You Make certain Your Safety Brake is not on to.

[Corsairdeluxe]

Apply a lot of heat fast to the hub(acetylene).
 You want the hub to expand before the axle. Not a sure fire thing ,but it sometimes works.
I have found KROIL to be the best penetrating oil.