Kaiser Frazer Owners Club Forum
General Category => General Discussion => Topic started by: rooney on September 29, 2009, 04:18:14 PM
-
I have some NOS Kaiser Frazer upper and lower arm pivot kits....
Can anyone tell me what these part numbers fit: 205780, 208597, 212340, 205782
I appreciate it>>>THANKS STEVE M
-
I don't know what other cars these fit, but the following fit a '51 Frazer Vagabond, at least.
205780 Front upper arm pivot - inner repair kit
205782 Front lower arm pivot - inner repair kit
-
Thank you for the info, maybe these kits fit other kaiser frazers also....ROONEY
-
205782 -Lower inner repair kit for 51-53K at least, and as far as I know 54's as well.(no 54 parts book)
208597 - Right (high pitch) horn for 51-53K and likely 54
212340 -upper inner pivot kit for HJ
205780 is not called out for 51-55K so would assume it's older series
-
205780 is not listed in the 1947 - 48 Parts book
-
my reference shows 205780 as the inner upper arm pivot kit for 47-49K and 47-51F
-
Thanks you all for the info, does anyone need any of these, if so make an offer....STEVE M. smav@charter.net or 989-356-9201
-
What do you wawnt for the 205782 Front lower arm pivot - inner repair kit?
I have one, but need two.
Thanks,
John
jerussel@msn.com
-
205782 -Lower inner repair kit for 51-53K at least, and as far as I know 54's as well.(no 54 parts book)
208597 - Right (high pitch) horn for 51-53K and likely 54
212340 -upper inner pivot kit for HJ
205780 is not called out for 51-55K so would assume it's older series
Can anyone tell me what the #208591 susp. part is for, #208597 wasn't correct that I posted before...
Also is this Distributor for a Kaiser? Part number Auto-lite IGS 4211 7B1T IGS 1170 under the housing....
(http://i555.photobucket.com/albums/jj453/rooney3100/DSCN0936.jpg)
THANKS STEVE M
-
The Autolite IGS-4211 was used on 1947-48 Kaiser. The 1949-51s used an Autolite IGS-4214 which had a different angles for the centrifugal and vacuum advance but physically, they're the same.
Part number 208591 is "Front suspension upper arm inner-pivot" repair kit for a 1951 Kaiser and likely all following years ('52-'55) but I can't be sure on that.
-
The Autolite IGS-4211 was used on 1947-48 Kaiser. The 1949-51s used an Autolite IGS-4214 which had a different angles for the centrifugal and vacuum advance but physically, they're the same.
Part number 208591 is "Front suspension upper arm inner-pivot" repair kit for a 1951 Kaiser and likely all following years ('52-'55) but I can't be sure on that.
Thanks a Bunch for the info>>>Does anyone need any of these parts? ROONEY
-
ROONEY, I'm interested in "# 205780 as the inner upper arm pivot kit for 47-49K and 47-51F" for my 49 Frazer. I haven't got into it yet but I might need it. I'll email you...
-
The numbers are different in my 49 parts book or I'm reading it wrong. My book says #202052, is the kit, but the "205780" number is there too in the "Numerical Index". I'm guessing it's the same part.
-
205782 -Lower inner repair kit
205780 - pivot , upper arm, inner (only in kit)
These are in my 49 parts book.