Help the needy again...Darrin Hood release braket?

[njpatera]

Greetings all...Somewhere along the way the original Hood release lever was changed out to a generic replacement. I'll locate a replacement later but my problem is...I'm missing the bracket that is suppose to secure it under the dash... Is it unique to the Darrin or is it a Kaiser/HJ L-bracket like the one pictured below?
Regards!

[joefrazer]

The hood release cable and bracket is the same as 54 Kaiser. The 51-53 unit has the same bracket but the cable is too short - or so I’ve been told.

[njpatera]

as always....much appreciated!

[pnw_oldmags]

Part Number 215132 only shows up in the Darrin Parts Manual.
If that is the part you are seeking.  Best get it from another Darrin.

[Terry T]

some judges claim that they are to be chromed, early cars, at least, were cad plated

[njpatera]

Knob??? We’re later cars a big old generic, black knob release or were all the “Hood” inscribed lever? I don’t want to assume, but is the term “knob” in the parts listing just generic jargon? Just want to clarify as I have nothing to work with and found one pic online that barely shows the lever clearly. 

[joefrazer]

Well, I can tell you that the unit I removed from the car is identical to the 54 Kaiser unit I installed with the exception of a small hook on the 54K unit that is used to attach the cable to the fender well. I replaced the original because the cable had snapped. Both units have CAD plated handles.