Author Topic: 1954 leaf spring bushings  (Read 1409 times)

rqa040

  • Jr. Member
  • **
  • Posts: 58
    • View Profile
    • Email
1954 leaf spring bushings
« on: January 13, 2020, 02:41:43 PM »
Wanted, front and rear leaf spring bushings for a 1954 Kaiser Manhattan. Part numbers are 208086 and 208088. Need complete set. Thank you in advance.
Bill
269 4715854
« Last Edit: January 14, 2020, 04:17:56 AM by rqa040 »

rrdcorvair

  • Full Member
  • ***
  • Posts: 148
    • View Profile
    • Email
Re: 1954 leaf spring bushings
« Reply #1 on: January 15, 2020, 01:23:13 PM »
We have a few spare rear leaf spring shackle kits for the 51-55 Kaisers.  They include the four rear rubber bushings and the shackle link and nuts.  They are $50 per side plus shipping.  We do not have the front bushings.  We have had leaf springs made and they come with those bushings already pressed in to place. If interested my email is ldladykf@yahoo.com, Char Dayton.

mbflemingkf

  • Hero Member
  • *****
  • Posts: 812
    • View Profile
    • Email
Re: 1954 leaf spring bushings
« Reply #2 on: January 15, 2020, 10:43:19 PM »
Check with St. Louis Spring on the front bushings.
KFOCI #4818, Since 1982

Rear view mirror:
1954 Kaiser Manhattan, 4 Door (Now in FL)
1955 Kaiser Manhattan, 2 Door (Now in TX)
1953 Kaiser Manhattan, 4 Door (Now in Australia)
Thousands of parts & literature (All over the world)

MarkH

  • Hero Member
  • *****
  • Posts: 1083
    • View Profile
    • Email
Re: 1954 leaf spring bushings
« Reply #3 on: January 18, 2020, 10:52:43 AM »
These guys have a good selection of bushings too. http://www.springsnthings.com/

I bought some oversized ones with the correct ID, ran a bolt & nut through them, chucked them in my drill press and used a file to work them down to the correct OD for the fronts of my Aero springs.
« Last Edit: January 18, 2020, 11:06:57 AM by MarkH »
Fully restored '54 Aero Lark
Rusty '58 Austin Healey 100-Six
Barely running'74 Chevelle Malibu

konrad

  • Sr. Member
  • ****
  • Posts: 385
    • View Profile
    • Email
Re: 1954 leaf spring bushings
« Reply #4 on: January 21, 2020, 11:34:17 AM »
I bought some oversized ones with the correct ID, ran a bolt & nut through them, chucked them in my drill press and used a file to work them down to the correct OD for the fronts of my Aero springs.

Lathe work in the vertical plane...most ingenious and an excellent idea.

Tucking that into the back of my disordered mind.  :)
51 Kaiser Deluxe