Author Topic: Ignition Key Blanks  (Read 1317 times)

WillysTom1

  • Full Member
  • ***
  • Posts: 107
    • View Profile
    • Email
Ignition Key Blanks
« on: November 17, 2021, 07:03:39 AM »
Anyone have an ignition key blank for 1950 Kaiser?
1955 Willys Custom
Former owner of 1951 Kaiser Deluxe, 1951Henry J, 1955 Willys Bermuda

Bulletin Editor

  • Sr. Member
  • ****
  • Posts: 375
    • View Profile
    • Email
Re: Ignition Key Blanks
« Reply #1 on: November 17, 2021, 11:48:21 AM »
Anyone have an ignition key blank for 1950 Kaiser?

Tom, Have you contacted Anna Hansen? She is the widow of Richard Hansen, who offered them for sale in the Bulletin for years. She's listed in the 2021 Membership Roster.
Barbara Mueller
1952 Henry J Corsair deLuxe
KFOCI Secretary  secretary@kfclub.com
Bulletin Editor  bulletin@kfclub.com

mbflemingkf

  • Hero Member
  • *****
  • Posts: 812
    • View Profile
    • Email
Re: Ignition Key Blanks
« Reply #2 on: November 17, 2021, 01:29:35 PM »
Jack, it appears Tom is looking for a key blank for a 1950.  Have others been made?   Mike

KAISER "K" key blank set. K Key fits 1951-1955 ONLY. $10.
Please allow 2 weeks. Anna Hansen #9520, 3325 Houghton
Ave, Corning CA 96021, 530-824-2331
KFOCI #4818, Since 1982

Rear view mirror:
1954 Kaiser Manhattan, 4 Door (Now in FL)
1955 Kaiser Manhattan, 2 Door (Now in TX)
1953 Kaiser Manhattan, 4 Door (Now in Australia)
Thousands of parts & literature (All over the world)

WillysTom1

  • Full Member
  • ***
  • Posts: 107
    • View Profile
    • Email
Re: Ignition Key Blanks
« Reply #3 on: November 18, 2021, 08:01:49 AM »
   Thanks for the info, I had seen that ad before and apparently the early Kaisers had a different key blank. I called Mrs. Hansen and left a message anyway.
   The strange thing is, my ignition key has "Dodge" stamped on it. I will pursue that possibility. I will post my results so that others may have that info.
1955 Willys Custom
Former owner of 1951 Kaiser Deluxe, 1951Henry J, 1955 Willys Bermuda

kaiserfrazerlibrary

  • Hero Member
  • *****
  • Posts: 3005
  • KFOCI Historian
    • AOL Instant Messenger - none
    • Yahoo Instant Messenger - none
    • View Profile
    • Email
Re: Ignition Key Blanks
« Reply #4 on: November 18, 2021, 10:42:12 AM »
There is some interchange ability on key blanks.  The item that Richard (and now his wife) offered was the blank of the type K-F used in the later kaisers, Henry J/Allstate and even the Darrin (?).  I have the "bitting" information but if you have a working key and you want to try a blank of any kind, check out the Walmart auto center in your area.  If they have the Hillman machine for cutting keys and measuring for a suitable blank to work with, they can cut a key on a different blank compared to the original (aluminum with K for Kaiser and HJ/Allstate; Frazers used a similar blank with the F on it for Frazer).  You may find if you have one of the reproduction blanks that the trunk key blank is just a bit longer than the ignition key blank.  I tried it here in the shop and we could cut both keys but the ignition key did not work (goes in all the way but does not turn).  Our HJ uses the trunk blank and it worked for starting the car just fine.