« previous next »
Pages: [1]

Author Topic: 47 Kaiser brake cam adjustment  (Read 1266 times)

billbet

  • Newbie
  • *
  • Posts: 2
  • Member since 2003
    • View Profile
    • Email
47 Kaiser brake cam adjustment
« on: June 07, 2013, 05:01:08 PM »
Hello, I'm having a problem with the brake job I'm doing on my 47 Kaiser .The adjustment cams are frozen and without the proper tool ( impossible to find) recommended in the Kaiser manual I can not complete the adjusting of the brake shoes to the drum. Any suggestions all help would be greatly appreciated. Thanks Bill
« Last Edit: June 07, 2013, 05:08:05 PM by billbet »
Logged
BB

joefrazer

  • Hero Member
  • *****
  • Posts: 4043
    • View Profile
Re: 47 Kaiser brake cam adjustment
« Reply #1 on: June 08, 2013, 10:42:15 AM »
The cams are available so I would go ahead and cut them off.

Here's a link to a site with everything you should need - http://www.kaiserwillys.com/category/willys-jeep-brakes-adjusting-hardware-parts-accessories

You'll want to use part numbers 648348 and 648347.
Logged

rialto

  • Full Member
  • ***
  • Posts: 230
    • View Profile
    • Email
Re: 47 Kaiser brake cam adjustment
« Reply #2 on: June 08, 2013, 03:41:55 PM »
You could probably heat the nuts and they would free up. A propane torch probably wouldn't be hot enough you would need acetylene. I recently bought a wrench for the top of shock absorbers. It looks like it might fit the adjusters but I haven't tried it yet.
Logged
Pages: [1]
« previous next »